Connecting an Analog Cable Converter Box
This connection allows you to watch cable and premium channels. You should keep your TV selected to “Cable IN” so that you can use the TV features. When viewing premium channels, select “Air IN” and tune the TV to channel 3 or 4 (whichever channel is vacant in your area), then use the converter box to change channels. You will need two coaxial cables.
From
Cable
NOTES
•When you use a converter box with your TV, there may be features that you can not program using the remote control, such as programming your favorite channels and blocking channels.
•The output from “Cable Out” is not available when “Air/CATV” is set to “Cable” in the PIP menu.
Connecting an Analog Cable Converter Box and a VCR
This connection allows you to watch and record basic and premium cable channels, as well as watch videotapes. You should keep your TV selected to “Cable IN” so that you can use the TV’s features. When viewing premium channels or recording with the VCR, select “Air IN” (whichever channel is vacant in your area), then use the converter box to change channels.
TV Rear Panel
From
Cable
Caution: If you want to record one channel while watching another channel, a splitter (not included) must be added between the cable and “Cable IN”. One output of the splitter goes to “Cable OUT” and the second output is connected to IN on the cable converter box.
If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.
When you use a converter box with your TV there may be features that you can not program using the remote control, such as programming your favorite channels and blocking channels.
Stereo VCR
