Your New Wide TV
Remote Control
You can use the remote control up to about 23 feet from the TV. When using the remote control, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player or Samsung
1.POWER
Turns the TV on and off.
2.P.MODE
Adjust the TV picture by selecting one of the preset factory settings (or select your personal, customized picture settings.)
3.ANTENNA
Press to select “AIR” or “CABLE”.
4.CHANNEL NUMBER
Press to directly tune to a particular channel.
5.-
Press to select additional channels (digital and analog) being broadcast by the same station. For example, to select channel
6.VOL +, VOL -
Press to increase or decrease the volume.
7.MUTE
Press to mute the TV sound.
8.ANYNET
Runs the Anynet view functions and sets up Anynet devices.
9.MENU
Displays the main
10.CH.LIST
Displays the channel list.
11.FAV.CH (Favorite Channel)
Press to switch between your favorite channels.
12.MODE
Selects a target device to be controlled by the Samsung remote control (i.e., TV, STB, VCR, CABLE, or DVD).
13.
Tunes to the previous channel.
14.SOURCE
Press to display all of the available video sources (i.e., TV,
15.CH /
Press to change channels.
Moves from one set of screen information to the next in TV Guide menu.
16.INFO
Press to display information on the TV screen.
17.EXIT
Press to exit the menu.
18.▲, ▼, œ, √, ENTER
Press to select highlight up, down, left, or right. While using the
19.MTS (Multichannel Television Stereo)
Press to choose Stereo, Mono or SAP (Secondary Audio Program).
20.PIP (Picture In Picture)
Displays the available channels in sequence. (These buttons change channels in the PIP window only.)
21.STILL
Press to pause the current screen.
22.ASPECT
Press to change the screen size.
23.SRS
Activates TruSurround.
24.DNIe (Digital Natural Image engine)
Activates DNIe.
25.SET
Used during set up of this remote control, so that it will work compatibly with other devices
26.SLEEP
Press to select a preset time interval for automatic shut off.
27.PIP Controls
CH/: Press to display the available channels in sequence. (These buttons change channels in the PIP window only.)
28.CAPTION
Controls the caption decoder.
29.VCR/DVD Controls
Controls VCR or DVD functions: Rewind, Stop, Play/Pause, Fast Forward.
30.RESET
If your remote control is not functioning properly, take out the batteries and press the reset button for about 2~3 seconds.