Hitachi 62VS69 important safety instructions Connecting a Component

Connecting External Video Sources

CONNECTING A COMPONENT
		Apparatus Claims of U.S.	CableCARD™
SOURCE TO INPUT 3 OR 4: Y-PBPR.		Patent Nos. 4,631,603;
		4,907,093; and 6,381,747	(Top of card faces right)
	CABLE	4,577,216; 4,819,098;
		licensed for limited
		viewing uses only.

Top faces

1.Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the TV set on the right.

2.Connect the cable from the CB/PB OUT or B-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (PB) jack.

3.Connect the cable from the CR/PR OUT or R-Y OUT of the laserdisc/DVD player or HDTV set top box to the INPUT (PR) jack.

4.Connect the cable from the AUDIO OUT R of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/R) jack.

5.Connect the cable from the AUDIO OUT L of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/L) jack.

6.Press the the INPUTS button, then select INPUT 3 from the INPUTS menu to view the program from the Laserdisc/DVD player or HDTV set top box. The VIDEO OSD label disappears automatically after approximately four seconds.

7.Select CABLE from the INPUTS menu to return to the previous channel.

NOTE: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.

2.See page 14 for tips on REAR PANEL CONNECTIONS.

	Upgrade Card
AIR	HDMI INPUT 1
Y/	Y/
VIDEO	VIDEO

MONITOR OUT
S
I			PB	PB
V
I
D				OPTICAL OUT
E
O			PR	Digital Audio
V				PR
I
D
E	(MONO)	(MONO)	(MONO)	(MONO)
O
A				L
U		TV AS CENTER
D								CAUTION
I
O				R
AUDIO	INPUT 1	INPUT 2	INPUT 3	INPUT 4
TO Hi-Fi
				R	L	PR	PB	Y
						OUTPUT

DVD Player

First time use

19