Hitachi 62VS69 important safety instructions Turn clockwise to tighten the lamp cover screw

Page 59

Lamp Replacement

5.Be sure to install the lamp cover by re-engaging the two clips and slide to the right. Then tighten the screw of the lamp cover before turning the power on, otherwise it may cause unusual colors. If the lamp cover is not installed and you try to turn ON the TV ,the power will be off and the Lamp Indicator will flash (see page 9).

	Place back in the LAMP COVER	LAMP COVER
	then slide to the right.	LAMP COVER
	then slide to the right.

SCREW

Turn clockwise to tighten the lamp cover screw.

NOTE: If power is connected before the Lamp Cover is installed, the power will be off and the Lamp Indicator will flash (see page 9).

6. Plug power cord into AC outlet and turn on the main power switch.

120V

NOTE: This product contains lead and a lamp that contains mercury. Dispose of this product and its lamp in accordance with applicable environmental laws. For lamp recycling and disposal information, go to www.lamprecycle.org. For product recycling and disposal information, contact your local government agency or eRecycle.org (in California), the Electronic Industries Alliance at www.eiae.org (in the US) or Electronic Product Stewardship Canada atwww.epsc.ca (in Canada).

For more information, call “1-800-Hitachi”.

Lamp Replacement

59

Image 59

Contents Useful Information Important Safety Instructions First Time USE Remote ControlLamp Replacement ON-SCREEN DisplayRead Before Operating Equipment Important Safety InstructionsFor More INFORMATION, Call 1-800-HITACHI Power sourceModifications Lead/Mercury NoticeFirst time use AccessoriesRemote Control Battery Installation and Replacement Viewing How to set up your new Hitachi Projection TelevisionAntenna LocationAntenna Connections to Rear Jack Panel Hook-up Cables and ConnectorsQuick Reference Remote Control Buttons and Functions Side Input Jacks Input Front Panel ControlsLamp Indicator Power LightTemp Indicator Front Panel Jacks and Connections Rear Panel Connections CableCARD Slot TV AS Center InputsCableCARD Information and press the Select button Time useAdditional CableCARD Information Use the Cursor buttonVIDEO,Y-PBPRand Hdmi Tips on Rear Panel ConnectionsSpeakers TV AS Center Connecting External Video SourcesBefore Operating External Video Source FirstConnecting a Composite Video Approximately four seconds InputConnecting a Component Remote Control Remote ControlCont How to Use the Remote to Control Your TVRol Remote ZOOM1/ZOOM2 ControlStandard ExpandedExit button Inputs buttonPICTURE-IN-PICTURE button Menu buttonWhite Channel CH DownPIP button POP Mode Picture-in-PicturePicture-in-Picture PIP RolSurf Mode Picture-in-Picture PIP Mode Picture-in-PictureSplit Mode Picture-in-Picture Strobe Freeze Main FreezeSplit Freeze Cable Brand Codes Remote Control for Cable Box FunctionsOperating the Precoded Function for Your Cable BOX MY Satellite Receiver Remote Control for Set-Top Box/Satelite Receiver FunctionsSatellite Brand Codes SET TOP BOX Brand CodesDVD Brand Codes Remote Control for DVD FunctionsOperating the Precoded Function for Your DVD Player VCR Brand Codes Remote Control for VCR FunctionsOperating the Precoded Function for Your VCR On-Screen Display On-Screen DisplayDRC Reen On-DisplayScSRS BBEVideo Aspect Mode Black Side Panel Reset Video SettingsVertical Position BBE AudioSRS Second Audio Program SA Screen DisplayStereo ST MonoDRC LanguageDigital Output PCMChannel Manager Signal MeterSignal Meter Channel List Start or Reset optionAuto Channel Scan Cable or AIRLocks Change Access CodeNot Rated Movie RatingsMotion Picture Ratings Table TV Parental Guide Ratings Table TV RatingsCanadian Ratings English Table Canadian Ratings EngCanadian Ratings French Chart Set The Clock TimersAdjust Clock for Daylight Savings Set Day/Night Timer Set Sleep TimerSelect Finish Time HOUR/MINUTE, AM or Set Event TimerEvent 1 , Event 2 , Event 3 , Event 4 and then Select Start Time HOUR/MINUTE, AM orSolid SetupSET the Menu Background Shaded or Set The Inputs Lamp Power ControlOn-Screen DisplayTV Tuner Out Digital CaptionsSet Monitor Out MonitorHDMI1 ANTYES HDMI1 YESInsert MMC Card UpgradesUpgrade NOW Een On-DisplaySc Lamp Life Lamp Replacement Lamp Replacement Lamp ReplacementLamp Compartment 120VHandle Lamp UnitTurn clockwise to tighten the lamp cover screw Useful Information Equipment Care and TroubleshootingTroubleshooting Switch ON/OFFReception Problems Inputs Features and SpecificationsFeatures DimensionsDigital Media Division UsefulInformation Home Electronics DivisionEND User License Agreement for Hitachi DTV Software End User Licence Agreement for Hitachi DTV SoftwareLicense Agreement Image Input Type Format Aspect Video ID Auto Aspect AppendixesAppendix Index IndexPage Page Page Page Page QR66311