Hitachi 50C10E important safety instructions Rear Panel Jacks, Monitor OUT

REAR PANEL JACKS

FIRST TIME USE

				DVI-HDTV
ANT A		PR	PB	Y
TO	INPUT 1
		R	(MONO)/L
CONVERTER
				AUDIO
		PR	PB	Y/VIDEO
ANT B	INPUT 2
		R	(MONO)/L
				AUDIO
		R	(MONO)/L	VIDEO	S-VIDEO
AUDIO	INPUT 3
TO HI-FI
CENTER		R	(MONO)/L	VIDEO	S-VIDEO
IN	INPUT 4
L		R	L	VIDEO	S-VIDEO
	MONITOR
	OUT
R			AUDIO

Antenna Input/Output

ANT A- A 75-Ohm RF antenna or CATV (Cable TV) input. ANT A can be displayed as a main picture or sub-picture.

ANT B- A 75-Ohm RF antenna or CATV (Cable TV) input. ANT B can only be displayed as a main picture. ANT B cannot be displayed as a sub-picture.

TO CONVERTER- This antenna output allows the ANT A connection to pass directly to a different source, such as a cable box, only when ANT B is displayed as a main picture.

Audio/Video Inputs 1, 2, 3 and 4

The VID1~VID4 buttons will select each video source each time they are pressed. Use the audio and video inputs to connect external devices, such as VCRs, camcorders, laserdisc players, DVD players etc. (If you have mono sound, insert the audio cable into the left audio jack.)

NOTE: You may use VIDEO or S-VIDEO inputs to connect to INPUT 3 and 4, but only one of these inputs may be used at a time.

￿MONITOR OUT

These jacks provide fixed audio and video signals which are used for recording. Use the S-VIDEO Output for high quality video output.

NOTE: S-VIDEO output may be used for recording only when the input is of S-VIDEO type.

AUDIO TO HI-FI Output

These jacks provide variable audio output to a separate stereo amplifier. With this connection, the audio to the stereo can be controlled by the television’s main volume.

CENTER IN (Input)

This jack is for stereo amplifiers with center signal capability. This feature allows the TV speakers to be used as a center speaker. The TV must be set as a center channel by selecting “TV as Center” on the Internal Speakers Settings of the Audio Menu (see page 38).

S-VIDEO Inputs 3 and 4

Inputs 3 and 4 provide S-VIDEO (Super Video) jacks for connecting equipment with S-VIDEO output capability.

10