Hitachi 50C10E important safety instructions Connecting a Stereo Source to INPUT2~INPUT5

CONNECTING EXTERNAL VIDEO DEVICES

FIRST TIME USE

CONNECTING A STEREO SOURCE TO INPUT2~INPUT5

1.Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below.

2.Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.

3.Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.

4.Press the VID2~VID5 button to view the program from the VCR or laserdisc player. The VIDEO OSD label disappears automatically after approximately four seconds.

5.Press the ANT button to return to the previous channel.

				DVI-HDTV
ANT A		PR	PB	Y
TO	INPUT 1
		R	(MONO)/L
CONVERTER
				AUDIO
		PR	PB	Y/VIDEO
ANT B	INPUT 2
		R	(MONO)/L
				AUDIO
		R	(MONO)/L	VIDEO	S-VIDEO
AUDIO	INPUT 3
TO HI-FI
CENTER		R	(MONO)/L	VIDEO	S-VIDEO
IN	INPUT 4
L		R	L	VIDEO	S-VIDEO
	MONITOR
	OUT
R		AUDIO
			OUTPUT
		R	L	V
		VCR

NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.

2.A single VCR can be used for VCR #1 and VCR #2 (see page 12), but note that a VCR cannot record its own video or line output. Refer to your VCR operating guide for more information on line input-output connections.

16