Advanced features (continued)
Password function
This projector is equipped with the password func- tion that is designed for prevention of theft and wrong operation by children and restriction on operation by other than specified users. The pass- word function has 3 modes as follows.
DISPLAY INPUT .......... When the projector is turned
on, the startup screen (or splash screen) will appear and stay on the screen until the password is entered. When the password is entered, the startup screen will switch to the regular operation screen.
MENU ACCESS ............ All the buttons except for
the POWER button on the projector are disabled. (The buttons on the remote control are enabled.) You can use this mode as a measure of prevention of wrong operation by children and restriction on
7.Enter the password again for confirmation using the same steps.
8.Select OK, and press the ENTER button.
•If the entered passwords don’t match, an error message will appear.
•To cancel the procedure, press the % button, select CANCEL, and press the ENTER button.
•You can cancel the procedure by pressing the MENU button alternatively.
To cancel the password function:
1.Display the FEATURE menu.
2.Press the { or } button to select PASSWORD FUNCTION.
3.Press the ENTER button.
•The screen for canceling the password function will appear.
operation by other than specified users. SPLASH ID SCREEN .. IMAGE CAPTURE and
opt.
FEATURE
XGA60
SPLASH SCREEN in the menu become unavailable. SPLASH SCREEN will be set to ON automatically.
To enable the password function:
1.Display the FEATURE menu.
2.Press the { or } button to select PASSWORD FUNCTION.
3.Press the % button to change the mode among DISPLAY INPUT 
, MENU ACCESS 
, and
SPLASH ID SCREEN 
.
•When the password has already been set, the mode won’t be changed. In such cases, press the ENTER button to cancel the password function and try again.
4.Press the ENTER button.
•The screen for setting the password function
PASSWORD FUNCTION
LOCK | OK |
|
|
|
|
|
|
UNLOCK | OK | ||
|
|
|
|
4.Press the ENTER button.
•The screen for entering the password will appear.
PASSWORD
O K |
| CANCEL |
|
|
|
5. | Enter the |
| buttons on the remote control. |
6. | Select OK, and press the ENTER button. |
| • If you enter a wrong password, an error mes- |
| sage will appear. |
| • To cancel the procedure, press the % button, |
| select CANCEL, and press the ENTER button. |
will appear.
opt.
FEATURE
XGA60
• You can cancel the procedure by pressing the |
MENU button alternatively. |
Important:
PASSWORD FUNCTION
LOCK | OK |
|
|
|
|
|
|
UNLOCK | OK | ||
|
|
|
|
5.Press the ENTER button.
• The screen for entering a password will appear.
PASSWORD
CONFIRM
O K |
| CANCEL |
6.Enter a
| 0 | 1 |
|
| ENTER |
2 |
| 3 |
4 | 5 | 6 |
7 | 8 | 9 |
•While the screen for password entry is being displayed, all buttons on the control panel except the POWER button will not function .
•If you forget your password, keep pressing the MENU and ENTER buttons on the control panel at the same time about 3 seconds to cancel the password function.
EN – 22