Mitsubishi Electronics SL4SU user manual Basic operation, Power-off, Auto Position button, AV mute

Page 14

Basic operation (continued)

Power-off

Use the following procedure to turn off the projector. Do not turn off the projector by unplugging the power cord while the lamp is on. Unplugging while the lamp is on degrades the lamp’s performance and causes failure in the projector.

1. Press the POWER button.

•The message “POWER OFF? YES : PRESS AGAIN” appears on the screen.

•To cancel, press any button except the POWER button. (Some buttons on the remote control don’t function for cancel.)

2. Press the POWER button within 10 seconds again.

•The lamp will go out and the STATUS indicator will start blinking.

•Though the lamp goes out at this second press of the POWER button, the air outlet fans continue operating for one minute to cool down the lamp and LCD panels. The STATUS indicator will stop blinking.

3. Unplug the power cord.

•The POWER indicator will go out.

•If the power cord should be unplugged accidentally while either the air inlet fan or the air outlet fans are operating or the lamp is on, allow the projector to cool down for 10 minutes with the power off. To light the lamp again, press the POWER button. If the lamp doesn’t light up immediately, repeat pressing the POWER button two or three times. If it should still fail to light up, replace the lamp.

Important:

•When storing the projector in the provided carrying case, the lens should face up.

AUTO POSITION button

When the image isn’t projected in the right position with COMPUTER selected as the input source, follow the procedure below.

1.Project a bright image such as the “Recycle Bin” window on the full screen.

2.If the screen saver is running, turn it off.

3.Press the AUTO POSITION button.

•If the image is still not in the right position, adjust the image position using the SIGNAL menu.

Volume from the speaker

Press the VOLUME + or – button to change the volume from the speaker.

The volume control bar will appear on the screen.

VOLUME

15

•The volume control bar will disappear about 10 seconds after the VOLUME button is released.

•The VOLUME buttons don’t function while the menu selection bar or the menu is being displayed.

•When a high-level audio signal, such as a DVD audio signal, is supplied to the AUDIO IN terminal, the output from the speaker may be distorted.

AV mute

The video and audio signals are temporarily muted when the MUTE button is pressed. To cancel muting, press the MUTE button again.

•If MUTE MODE in the INSTALLATION menu is set to IMAGE, the splash screen will appear when the MUTE button is pressed.

•You can alter the splash screen optionally. See page 21.

•When muting starts, the lamp mode becomes LOW, darkening the display of IMAGE. This is not a product malfunction.

Caution:

•After using the projector, wait one minute for the air outlet fans to stop. Then unplug the power cord from the wall outlet.

•The lamp can’t be lit again for one minute after turned off for safety purpose. It will take another one minute for the STATUS indicator to go out. If you want to turn on the projector again, wait until the indicator goes out, and then press the POWER button.

•The air outlet fans rotate faster as the temperature around the projector rises.

•When the temperature around the projector rises high, the sign “TEMPERATURE!!” blinks red on the screen. If the temperature stays high, the lamp will go out automatically.

EN – 14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 4 S When using the projector in Europe Compliance NoticeContents Important safeguards Do not unplug the power cord during operation Do not keep using the damaged projectorDo not look into the lens when the projector is operating Clean the air-filter once a monthTerminal panel OverviewControl panel 3 4Remote control Bottom sideOperation range of the remote control Remote controlBattery loading Front projection InstallationLayout of the projector Front projection, ceiling mountingProjector + DVD player or Hdtv decoder Basic connectionsProjector + AV device VCR, etcComputer Projector + ComputerFor Macintosh About DDCPreparation for projection Adjustment of the projection anglePreparation Following casesPower-on Basic operationBasic operation Power-offVolume from the speaker Auto Position buttonBasic operation InstallationMenu operation Menu operation Computer Video mode to always output the audio that is Expand Mode .. Choose the mode for enlarging the image. SeeTerminal when Video is chosen as the source. Select Selected, the film mode will not be activatedColor temperature Image adjustmentImage adjustment About color temperatureAdjustment of the image from the computer Simple adjustment methodStill Advanced featuresExpand Set the background color Setting of the image displayed during startup or mutingSetting procedure Set the image sizeConnection Advanced featuresPage-up and page-down USB 4PTo enable the password function Password functionTo cancel the password function Interval of lamp replacement Lamp replacementReset of the lamp operation time Cleaning of the projector and the ventilation slots MaintenanceCleaning of the air-filter Filter cover Cleaning of the lensTroubleshooting Images arent projected on the screenImages arent projected correctly Troubleshooting OthersNormal condition IndicatorsPower Status Abnormal conditionSpecifications SL4SUReplacement part Option / Not included in the box ConnectorsDimensional drawings unit mm What’s included in the boxSpecifications XGA851080i 60 1125i 33.75 60.00 Mitsubishi Electric Corporation
Related manuals
Manual 5 pages 32.76 Kb Manual 2 pages 6.8 Kb

SL4SU specifications

The Mitsubishi Electronics SL4SU is a cutting-edge servo drive that has made a significant impact in the field of automation and industrial control. Designed for precision and efficiency, the SL4SU series embodies a perfect blend of technology, precision engineering, and user-friendly operation.

One of the standout features of the SL4SU is its compact design, which allows for easy integration into various industrial applications without occupying excessive space. This makes it an ideal choice for businesses looking to optimize their machinery while enhancing operational effectiveness. Additionally, its lightweight structure facilitates easier installation and maintenance.

Performance-wise, the SL4SU is characterized by high-speed control capabilities, which provide outstanding torque and velocity control. The product utilizes advanced control algorithms, ensuring that movements are smooth and precise, which is essential for applications involving robotics, CNC machines, and conveyor systems. This level of precision enables manufacturers to maintain higher production quality and efficiency.

The SL4SU also incorporates innovative technologies such as real-time feedback control, allowing the system to adjust dynamically to varying load conditions. This responsiveness ensures consistent performance while reducing the chances of error, making it a reliable choice for critical applications. Furthermore, the regenerative braking feature helps in energy conservation by capturing energy during braking and feeding it back into the system, thereby lowering operational costs.

User experience is further enhanced with the SL4SU through its integrated communication protocols, including Ethernet/IP and CC-Link, making it compatible with various industrial networks. This connectivity is crucial for seamless integration into the Industry 4.0 landscape, facilitating data exchange and process monitoring.

Moreover, Mitsubishi Electronics emphasizes safety with the SL4SU by incorporating various safety features, including overcurrent protection and thermal protection, ensuring reliable operation and minimizing downtime.

In conclusion, the Mitsubishi Electronics SL4SU represents a significant advancement in servo drive technology, combining a compact design, high-speed control, real-time feedback, and robust safety features. These characteristics make it a preferred choice for manufacturers looking to enhance automation and optimize their industrial processes. With the SL4SU, businesses can expect improved productivity, efficiency, and reliability in their operations.
Top Page Image Contents