Mitsubishi Electronics SL4SU user manual Password function, To cancel the password function

Password function

This projector is equipped with the password func- tion that is designed for prevention of theft and wrong operation by children and restriction on operation by other than specified users. The pass- word function has three modes as follows.

DISPLAY INPUT .......... When the projector is turned

To cancel the password function:

1.Display the FEATURE menu.

2.Press the { or } button to select PASSWORD FUNCTION.

3.Press the ENTER button.

•The screen for canceling the password function will appear.

ENGLISH

on, the startup screen (or splash screen) will appear and stay on the screen until the password is entered. When the password is entered, the

opt.

FEATURE

XGA60

startup screen will switch to the regular operation screen.

MENU ACCESS ............ All the buttons except for

the POWER button on the projector are disabled. (The buttons on the remote control are enabled.) You can use this mode as a measure of prevention of wrong operation by children and restriction on operation by other than specified users.

SPLASH ID SCREEN .. IMAGE CAPTURE and SPLASH SCREEN in the menu become unavailable. SPLASH SCREEN will be set to ON automatically.

To enable the password function:

1.Display the FEATURE menu.

2.Press the { or } button to select PASSWORD FUNCTION.

3.Press the % button to change the mode among DISPLAY INPUT, MENU ACCESS, and SPLASH ID SCREEN.

•When the password has already been set, the mode won’t be changed. In such cases, press the ENTER button to cancel the password function and try again.

4.Press the ENTER button.

•The screen for setting the password function

PASSWORD FUNCTION

LOCK	OK
UNLOCK	OK

4.Press the ENTER button.

•The screen for entering the password will appear.

PASSWORD

O K CANCEL

5.Press the { or } button to select a number from 0 to 9.

6.Press the % button.

•You can set the next digit.

7.Repeat steps 5 and 6 to enter the four-digit pass- word.

8.Press the % button, select OK, and press the ENTER button.

•If you enter a wrong password, an error mes- sage will appear.

•To cancel the procedure, press the % button, select CANCEL, and press the ENTER button.

•You can cancel the procedure by pressing the MENU button alternatively.

Important:

• If you forget your password, keep pressing the

will appear.

opt.

FEATURE

XGA60

MENU and ENTER buttons on the control panel

at the same time about three seconds to cancel the

password function.

PASSWORD FUNCTION

LOCK	OK
UNLOCK	OK

5.Press the ENTER button.

• The screen for entering a password will appear.

PASSWORD

CONFIRM

O K CANCEL

6.Press the { or } button to select a number from 0 to 9.

7.Press the % button.

• You can set the next digit.

8.Repeat steps 6 and 7 to set a four-digit password.

9.Enter the password again for confirmation using the same steps.

10.Select OK, and press the ENTER button.

•If the entered passwords don’t match, an error message will appear.

•To cancel the procedure, select CANCEL, and press the ENTER button.

•You can cancel the procedure by pressing the MENU button alternatively.

EN – 23