Mitsubishi Electronics SL2U XL1X user manual Basic connections, Projector + AV equipment

Basic connections

This projector can be connected to equipment such as PC, VCRs, video cameras and DVD players.

Important:

•Make sure that your equipment is turned off before connection.

•Plug in firmly and unplug by holding the plug, not by pulling the AC power cord.

•If connected units are set too close to one another, the image may be affected.

•Refer to the user manual of each component for details of connections.

Projector + AV equipment

Important:

•Match the color of video and audio plugs on the AV cable with the connections.

RS-232C		S-VIDEO	to S-video input
	L	MAIN
COMPUTER IN	R		to video input
		VIDEO
		AC IN
	AUDIO IN VIDEO IN		to audio input
COMPUTER OUT

to audio output to video output

VCR etc. to S-video output

•Speaker output is mono.

•Select VIDEO for the AUDIO MODE in the FEATURE menu to hear and to sound for the VIDEO. (Refer to page 17).

Projector + DVD player or HDTV decoder

Some DVD players have output terminal for 3 line fitting (Y, CB, CR). When connecting them to the projector, connect to COMPUTER IN of the projector.

DVD player or HDTV decoder

AUDIO cable

to AUDIO IN

Y CB(PB) CR(PR) to AUDIO OUT

BNC - RCA connector (optional)

No connection

G B R HD/CS VD

to COMPUTER

IN

Mini D-SUB 15 pin-BNC conversion cable (optional)

RS-232C	S-VIDEO
L	MAIN

COMPUTER IN

R

VIDEO

AC IN

AUDIO IN VIDEO IN

COMPUTER OUT

•Y, PB, PR is an example of the terminal names for a HDTV decoder.

•The terminal name is different depending on the connected equipment.

•Use mini D-SUB 15 pin-BNC conversion cable for connection.

•Some DVD players may not project the image correctly.

•When connecting with HDTV equipment which has R, G, B output, select RGB for the COMPUTER INPUT in the SIGNAL menu.

EN – 10