Mitsubishi Electronics VS-50805 manual Appendix 1- Diamond ShieldTM, Removal of the Diamond Shield

Page 77

Appendix 1- Diamond ShieldTM

The custom-fitted Diamond Shield is an extra protection for your television screen. It has a subtle tint that enhances picture contrast. It can be removed or installed, according to your preference.

Wear cotton gloves to prevent putting fingerprints on the Diamond Shield.

Removal of the Diamond Shield:

•to remove put a small piece of masking tape on the outward side of the Diamond Shield. This will designate the special scratch resistant side for later use

•remove the retaining clips (2) with a small, flat blade screwdriver. Press blade into opening at end of clips (Illustrations 1or 2) and pry out

•after loosening retaining clip ends, gently pull out to remove clips

•gently pull Diamond Shield towards you, bowing the shield out of its locking channels (Illustration 3 or 4)

•reinstall the retaining clips (2), if desired

Installation of the Diamond Shield:

•remove the retaining clips (2) with a small, flat blade screwdriver. Press blade into opening at end of clips (Illustrations 1 or 2) and pry out

•after loosening clip ends, gently pull out to remove clips

•Bow Diamond Shield towards you and insert into locking chan- nels (Illustrations 3 or 4)

•press in provided retaining clips (2) into place at ends first, then towards center

•your Diamond Shield is now installed

I M P O R T A N T

Store your Diamond ShieldTM carefully so that the shield does not become scratched.

77

Image 77

Contents Projection Television OWNER’S Guide Risk of Electric Shock Do not Open Contents Page Important Safeguards Damage Requiring Service Power LinesReplacement Parts Safety CheckUnpackingYour TV Special FeaturesChoosing a Hookup Following items are included with your new TVShortcuts TV to Antenna or Wall Outlet Cable ConnectionsConnection of TV to Cable Box Separate UHF and VHF antennasAudio Video Connections Connection of TV to VCR and Cable BoxAudio/Video Connections Connection of TV to VCR and Antenna or Wall Outlet CableAntenna/Cable Connections Connection of TV to the Active A/V Network Connection of TV to Stereo Audio SystemConnection of TV to AV Receiver Connection of TV to DVD with Component Video Outputs Connection of TV and Cable to Mitsubishis HD-1080 Receiver Connectors for TV and Cable to Hdtv ReceiverConnection of TV and Cable to Hdtv Receiver Connect the RGB cables to Connecting the cables is Hdtv Receiver TV BackHdtv receiver and the televesion Back panel. The sequence forInput Remote Control FunctionsMenu Guide Remote Control FunctionsInstalling the batteries Operating Your Remote ControlUsing the remote control with your TV For best resultsCable Box codes Remote Control of Other Audio and Video ProductsSatellite Receiver codes VCR codesAV Receiver codes Remote Control of Other Audio and Video ProductDVD Player codes For non-DTV channels Remote Control Channel SelectionCanceling the Sleep Timer Remote Control of the Sleep TimerSetting the Sleep Timer Menu System Cancel to clear a setting, or stop an automatic functionMaking Selections To exit the on-screen menusMenu button Main Menu Setup MenuMenu Screens Main Menu Captions Menu Channel Edit MenuVideo Settings Menu Advanced Features MenuMemorize Menu Setup MenuAfter channels are memorized, your remote control will Clock Setting Time Zone Daylight Savings Setup MenuSet Day Clock TimeTV Speakers AV NetworkAV Receiver AV Connection MenuOther or None Mits-A AV Receiver choices NoneMits-B OtherINPUT-1, INPUT-2 or Input menuAnt-A, Ant-B Captions Menu To make the closed captions Easier to read, you can choose Captions MenuBackground DTV Channel GuideChannel Channel Edit MenuAntenna ’ / * and blank Channel Edit MenuRemoving SQV channels using only the remote control Adding SQV channels using only the remote controlTimer Advanced Features MenuSet Time Set Day Advanced Features MenuInput Entry to Chip Parent Lock To delete a characterChip HOURS/LOCK by Time section Main Menu Advanced Features MenuChip Example V-Chip Parent LockOff General audience Chip HOURS/LOCK by Time Chip Start Time StopLock by Time Lock Time Unlock Time Main Menu Advanced Feature Menu Chip Parent Lock MenuConvergence Display for further instruc- tions Reset Factory DefaultsAdvanced Conver- gence Video Display Video Mute Timer Chip Parent Lock ConvergenceVideo Settings Menu AV Memory Audio Video Settings MenuAV Reset Audio/Video Settings MenuBlack Enhancement Using the Audio or Video button on the remote controlDescriptions of video settings Audio/Video Settings Menu Adjusting the pictureDescriptions of audio settings Audio/Video Settings Menu Adjusting the soundEnglish German French Italian Spanish Other Portuguese Cable Boxes and Satellite Receivers Special Remote Control FunctionsAV Receivers Mitsubishi AV Receivers DVD and Laser Disc players Not all functions for all modelsActivating PIP/POP Using PIP and POP FeaturesUsing the PIP Input button Using PIP and POP FeaturesUsing the PIP CH button Using the Adjust button with PIP or POPPress to remove the black bars Using the Exch button with PIPStandard shape models VS-50805 and VS-60805 FormatsAnamorphic Pictures Anamorphic widescreen Format examplesStandard format Standard format Press Format for Expand formatBefore you begin, be sure you have Remote Control of the Active AV NetworkInfrared Emitter from page 13. Connect as shown Special setups A/V equipmentEmitter Special setups TVMenu selection for AV connections pages TV Speakers Off Operating the systemVS-50805, WS-55805 and VS-60805 Front Control Panel FunctionsFront Control Panel Functions VS-50805 and VS-60805 Back Panel FunctionsINPUT-1 and 2 S-Video, Video Back Panel FunctionsINPUT-1 and 2 audio input Antenna ANT-A, LOOP-OUTPIP Audio Output Active A/V NetworkProblem Possible Solution TroubleshootingImportant Notes Cleaning E2RESET If Service is RequiredRemoval of the Diamond Shield Installation of the Diamond ShieldAppendix 1- Diamond ShieldTM Appendix 1- Diamond ShieldTM See pages 19-20 for instructions on applying these codes Appendix 2 Remote Control Programming CodesDBX Appendix 2 Remote Control Programming CodesUse the or to select V-Chip Parent Lock and press To change or permanently cancel the V-Chip Parent LockAppendix 3 Bypassing the V-Chip Parent Lock This page is blank = 1.0V p-p includes sync 75 ohms INPUT-3 Component Video connection compatibilityInput levels and timing with component video This page is blank Index Page Mitsubishi Digital Electronics AMERICA, INC Jeronimo Road Irvine, CA