Mitsubishi Electronics WD-73835 Setup Menu Options, Setup menu, Edit channel options

425. TV Menus

5. TV Menus 43

Setup Menu

Use the Setup menu to:

• Select English or Spanish for menus and on-screen text.

•Scan the channels available for the antenna or cable

service connected to the ANT 1 or ANT 2 jacks.

• Edit channel options, including channel locking.

•Set the TV’s internal clock.

•Set the TV Timer to turn on the TV automatically at a designated time.

• Set the energy mode for power consumption when	Setup menu, Scan option
the TV is powered off.

Setup Menu, continued

Edit

Virtual Channel Number (digital channels only). A channel number sent by a local broadcaster. Usually the virtual number is associated with the corresponding analog channel number. For example, a broadcaster may associ- ate digital channel 2-1 with their analog channel 2.

Physical Digital Channel Number. The channel number officially assigned to the actual broadcast frequency; shown on screen in parentheses.

Setup Menu Options

Setup menu, Edit channel options

• Set the TV Lamp Mode.

• Turn 3D mode on and off.

Setup Menu Options

	English	Display on-screen menus in either English or Spanish.
	Spanish	Note: To listen to audio in other languages (when available), see the section
Language		on the AV menu, Audio submenu, and refer to either Listen To > SAP (analog
		signal) or Language (digital signal).
	Ant-1 Air	Scan memorizes broadcast channels to make them easier to find. To start
Scan	Ant-1 Cable	channel memorization:
	Ant-2 Air	1.	Highlight one of the input selections based on your connection to ANT 1
	Ant-2 Cable
			or ANT 2:
			• Air when connected to an indoor or outdoor antenna.
			• Cable when connected to direct cable (no cable box)
		2.	Press to highlight START.
		3.	Press ENTER to start channel memorization for the selected input.

Use the Edit menu to edit channel options when ANT 1 or ANT 2 is the current source, To highlight a channel number to edit:

Edit	• Press CH  /  to jump to the next page of channel numbers. Press and hold CH  / to speed
	through pages.

•Press to move through all channel numbers, one at a time. Press and hold to speed through channel numbers.

The TV tunes to the highlighted channel on release of CH  / or .

Channel	Channels marked with a check are in memory. To add or delete a channel from
	memory, highlight the channel number and press ENTER. To add a single digital channel
	not in the list, see the notes under Scan on the opposite page.
	Digital channels are listed by virtual channel number with the physical channel number
	shown in parentheses.
Name	Assign a custom name up to six characters long to memorized channels. You can
	name analog channels and digital channels if broadcast without pre-assigned names.
	1. With the cursor in the Name field, press a number key repeatedly to cycle through
	the characters associated with the key, including !, &, blank (1 key) and /, *, - (0 key).
	2. Press ENTER to set the letter and move to the next letter position. To delete the
	current character and move back one position, press CANCEL.

Notes on Scan and channel memorization:

•Channel memorization may take up to 15 minutes to complete.

•To stop channel memorization before completion, press CANCEL.

•When watching TV, press CH to move through memorized channels.

•To add a digital channel that does not appear in the Edit menu without repeating channel memori- zation:

1.Look up the physical channel number for the new digital channel. The website www.antennaweb.org can help you find the physical channel number.

2.Tune to any channel on the Ant 1 or Ant 2 input your antenna is connected to.

3.Use the number keys and

CANCEL key to enter the physical channel number followed by “-1” and ENTER. For example, for physical channel 36, press

3 6 — 1 ENTER.

CANCEL

The TV will search for a digital channel on the channel 36 frequency. When it finds the channel, it will:

a.Add the channel to memory.

b.Change the channel number to the virtual channel number sent by the broadcaster.

c.Add to memory any associated sub- channels.

•Rememorize channels if you move the TV to a different geographic area with a different channel line-up.

Fav1–Fav6Use the six Fav channel banks to store groups of your favorite channels. For example, you can set up a Fav channel bank for each of your favorite program types (e.g., sports, news, children’s programs) or set up a bank for each TV user.

•Use to move the highlight through the Fav area of the screen.

•Press ENTER to insert a check mark to add the highlighted channel to one of the Fav banks.

•The same channel can be added to multiple Fav banks

•To remove a channel from a Fav bank, highlight the check mark and press Enter.

Note: To set up Fav channel banks without using this menu, see “Fav (Favorite Chan- nels)” on page 30.

Lock	Lock channels so that a pass code is required to view them. When you rememorize
	channels, all lock settings are cleared.
	Highlight the Lock column and enter a pass code when prompted. If you previously
	set a pass code to open the main Lock menu, use the same pass code. See “Lock
	Menu,” page 48 for more on pass codes.
	To lock or unlock a channel, highlight the lock icon for the channel and press Enter to
	switch between the locked and unlocked versions of the icon.