Mitsubishi Electronics WD-57833 manual Operating NetCommand-Controlled Devices

Page 58

586. NetCommand

Operating NetCommand-Controlled Devices

To Control Most Device Types

As an example of NetCommand control, if you are watching your cable box and you wish to tune to the next channel higher, press CH/PAGE . NetCommand then sends the “learned” channel-up control signal to the cable box.

1.With an IR emitter properly positioned in front of the device, use the Inputs > Learn screen to perform NetCommand setup for the device.

2.When you wish to use the device, press INPUT to display the Input Selection menu.

3.Press to highlight the icon for the device.

4.Press ENTER to switch the TV to the device. Note: if you have set up automatic input switching

for the A/V receiver, the A/V receiver will automatically switch to the correct input for the device.

5.To operate the device using the TV’s remote control, set the slide switch to the TV position.

6.Point the remote control at the TV (not the device) and press the key for the desired function.

Special Operation Methods

To Control an A/V Receiver

Switching Audio to and from the A/V Receiver

1.Press AUDIO.

2.Press to show the Speakers option.

3.Press to select either AV Receiver or TV.

Controlling A/V Receiver Power

1.Press AUDIO.

2.Press to show the Speakers option.

3.Press to select AV Receiver.

4.Point the remote control at the TV (not the A/V receiver) and press POWER to power the A/V receiver on or off

Controlling Other A/V Receiver Functions

With the A/V receiver powered on and selected, the TV’s remote operates the volume and mute functions. Also, when you switch to a device in the Input Selec- tion menu, the A/V receiver automatically switches to the correct audio input for the device.

Key Name in

Special Operation Description and Setup

How to Use

 

Learning Screen

 

 

 

 

 

Power On

Manual Power On/Off

1.

Press INPUT to display the Input Selection

 

Use for devices that have only one POWER key.

 

menu.

 

 

 

2.

Press

to highlight the icon for the

 

 

 

device to be powered on or off.

 

 

3.

With the Input Selection menu still displayed,

 

 

 

press POWER to send the power signal; you may

 

 

 

need to press POWER twice.

 

 

 

Note: If you press POWER without the Input

 

 

 

Selection displayed, the TV will turn off.

 

 

4.

Press ENTER to switch the TV to the device.

 

 

 

 

Power On

Automatic Power On/Off

•

To Power On the Device

Power Off

This feature is only for devices that have separate

 

1. Press INPUT to display the Input Selection

 

Power On and Power Off keys on their original remote

 

menu.

 

 

controls. If your device does not have a separate

 

2. Press

to highlight the icon for the

 

Power Off key, do not use the Power Off learn-

 

device to be powered on or off.

 

ing position; use only the Manual Power ON/OFF

 

3. Press ENTER to switch the TV to the device

 

method described above.

 

and NetCommand will send the Power On

 

In the NetCommand Learn screen:

 

command to the device.

 

a. “Learn” the Power On command in the Power •

To Power Off the Device

 

On learning position.

 

When you turn the TV off, the TV sends all

 

b. “Learn” the Power Off command in the

 

learned Power Off commands to all devices.

 

 

 

 

 

Power Off learning position.

 

 

 

 

 

 

 

Menu

Displaying the Menu for a Device

1.

While watching a device, press INPUT to display

 

 

 

the Input Selection menu with the device icon

 

 

 

highlighted.

 

 

 

2.

Press MENU to send the menu signal to the

 

 

 

device. The Input Selection menu will auto-

 

 

 

matically clear from the screen.

 

 

 

 

 

Page 57 Page 59
Image 58
Page 57 Page 59
Contents WD-57833 WD-65833 WD-73833 Refer Servicing to Qualified Service Personnel For Your RecordsContents Cleaning Recommendations Installation NotesLamp Replacement Operating NotesImportant Safeguards Package Contents Special Features of Your TVControl Panel TV Front PanelTV Guide On Screen Interactive Program Guide System Front InputsStatus Indicator Front-Panel IndicatorsPOWER/TIMER Indicator Lamp IndicatorTV Back Panel Hdmi Cable Categories Hdmi InputsComponent audio and video front and rear Pb Pr 480i/480p/720p/1080iANT 2. See Setup Edit Guidelines for Setting Up and Using Your New Widescreen TVAdditional TV Setup Getting StartedWhen You First Power On the TV Installing the Remote Control BatteriesInitial TV Setup When You First Connect a Device Setting Up TV InputsAdditional TV Setup Using the Setup Menu Change the Menu LanguageWith NetCommand Control of an A/V Receiver Controlling A/V Receiver Sound VolumeWith a Standard TV Setup More About Auto Input SensingComputer Video Connection Audio Video Output Connecting a Computer to the TVThis TV accepts digital computer signals only Digital DVIImage Resolution Using the TV with a Personal ComputerComputer Video Adjustments Computer Display FormatsBefore you Begin Hdtv Cable Box or Satellite Receiver with Component Video18 3. TV Connections Antenna with a Single Lead Wall Outlet Cable no cable boxAntennas with Separate UHF and VHF Leads For an antenna with flat twin leads%1MBZFS DVD Player with Component VideoVideo Connecting a VCR to an Antenna or Wall Outlet Cable OptionalConnecting a VCR to a cable box VCR to a Cable Box Audio & VideoTo connect an analog A/V receiver Receiver Sound SystemOlder Cable Box Receivers with Hdmi InputsComponent Y Pb Pr Video Connection CamcorderComposite Video Connection Hdmi ConnectionConnection Methods Ieee 1394 DevicesCompatible Ieee 1394 Devices Four-Pin and 6-Pin ConnectionsTips for Connecting Ieee 1394 Devices Ieee 1394 CamcordersChoosing a Viewing Source Sleep TimerTV Tips Remote Control Adjust Up/Down/Left/Right Navigate menus and change settingsLow-Battery Indicator NetCommand for Hdmi DevicesResetting the Remote Control Care of the Remote ControlChannelView Channel Listings Using ChannelViewFeature Press KeyAnt 1 Signal StrengthStatus Display TV-PGFav Favorite Channels ANT-1DVD Definitions TV Signals and Display FormatsSignal Definitions TV Display Format DefinitionsTV Display Formats See descriptions on the precedingSplit Screen Displays Split ScreenOperation of Split Screen TV Inputs for Split ScreenViewing Camera Files Jpeg Photos and the USB Photo PortSlide Show Media Setup MenuPhotos and Moving Video as Composite Video Keys for Jpeg Picture Slide ShowRemote Control Keys for the TV Menu System Main MenuAV Menu AV Menu OptionsVideo Noise High Film Mode Auto, OffOn if TV on Off Game Mode Off, On Global MediumVideo Menu Video Menu OptionsANT1/ANT2 SAP Audio MenuAudio Menu Options ANT1/ANT2Captions on Digital Channels Captions MenuCaptions on Analog Channels Captions Menu OptionsSetup Menu Options Setup MenuSetup menu, Scan option 1 EnterChannel Setup menu, Edit channel optionsEdit NameClock SettingsSelect either Applies or Ignore for Daylight Savings Time Timer On, Off Day TimerSetup menu, Timer options Input Ant-1, Ant-2, DVD, VCR, etcEnergy Energy Fast Power OnLow Power ModeVCR, PC Inputs MenuInputs Menu Options AVRUsing the TV Guide On Screen System Setting Up TV Guide On ScreenInputs Guide menu for TV Guide On Screen setup Parent Menu Lock MenuPass Codes Other Menu Alternate Rating SystemTV-Y7 Parent Menu Options U.S.-based rating systemTV-Y TV-GTime Other Menu Options alternate rating systemFront Panel About NetCommand Important Note on NetCommandIR Emitter Placement NetCommand Connecting IR Emitter NetCommandAdd or Remove Device Keys from NetCommand Control Initial NetCommand Setup for Most DevicesIf the device has no Power OFF key, skip this step Guide PowerCH/PAGE To Control Most Device Types Operating NetCommand-Controlled DevicesSpecial Operation Methods To Control an A/V Receiver Inside the Guide Outside the GuideSetting Up NetCommand Control of an A/V Receiver Before You Begin DVD Input key Before You Begin NetCommand-Controlled RecordingMaking a Recording To Cancel a Recording in Progress Using the Record Schedule MenuCancelling Recordings To Cancel a Scheduled RecordingMore on VCR Recording Setting Up Analog VCR Recordings with TV Guide On ScreenRecording from ChannelView Immediate Recording from ChannelViewTo Power On or Off a Compatible Ieee 1394 Device Using Ieee 1394 DevicesIeee 1394 Devices in the Input Selection Menu Disc Track List Screen Recording to Ieee 1394 DevicesDiscs  Disc Search by TimeAppendix a Specifications Ieee 1394 System CompatibilityLamp Appendix B Lamp-Cartridge Replacement and CleaningTo Receive a Replacement Lamp Under Warranty To Order a New LampRemoving the Old Lamp Cartridge Lamp-Cartridge ReplacementInstalling the New Lamp Cartridge Disposal of the Old Lamp CartridgeAppendix C Bypassing the Parental Lock Bypassing the Parental LockThis page intentionally left blank Appendix D Programming the Remote Control Functions Available for Other A/V DevicesCode Verification Programming the Remote ControlAudio Lock Universal A/V Receiver Control Programming Codes Audio Amplifiers Brand CodeCD Players Brand Code Cable Boxes Brand CodeDVD Players/Recorders Brand Code TFCLaser Disc Players Brand Code Satellite Receivers Brand CodeVCRs and DVRs Brand Code ABSSTS Before you change sound or picture settings If Appendix E TroubleshootingTV Reset Comparison Guide Reset Name When to Use How to Use Resulting ActionService Service and SupportSupport General TV Operation Symptom Remarks TV Channels Symptom RemarksTV Power On/Off Symptom Remarks Picture Symptom RemarksSymptom Remarks Indicators Symptom RemarksNetCommand Symptom Remarks Ieee 1394 Recording Symptom Remarks Ieee 1394 Devices Symptom RemarksAppendices Trademark and License Information Mitsubishi TV Software Mitsubishi DLP Projection Television Limited Warranty Mitsubishi Digital Electronics AMERICA, INC Index Index Page MDEAservice@mdea.com System Reset
Related manuals
Manual 96 pages 16.22 Kb
Top Page Image Contents