Mitsubishi Electronics WD-57833 manual Inside the Guide, Outside the Guide

6. NetCommand 59

Operating NetCommand-Controlled Devices, continued

Key Name in	Special Operation Description and Setup				How to Use
Learning Screen
Guide	Displaying the Disc Menu (DVD or high-defini-				While watching the device, press GUIDE to display the
	tion disc format)				disc menu.
	“Learn” the Disc Menu, Top Menu, or other key as
	named on the original remote in the Guide
	learning position.
	Displaying the On-Screen Program Guide				1. While watching the device, press GUIDE to
	(cable box or satellite receiver)				display the guide.
	1. “Learn” the Guide key on the original remote in				2. Press CH/PAGE		/  to send the Page Up/Dn
					commands for the guide.
		the Guide learning position.
	2.	Learn the PAGE	and PAGE	keys of the
		original remote in the Page Up and Page Dn
		learning positions.
Page Up	Using Page Up/Down				Inside the Guide
Page Dn	If the device’s original remote control has separate				Press CH/PAGE	/	to send the Page Up/Dn com-
	keys for Channel Up/Dn and Page Up/Dn, the TV				mands.
	remote control’s CH/PAGE  /			key can work like	Outside the Guide
	the two separate keys.
					Press CH/PAGE	/	to send the Channel Up/Dn
	1.	“Learn” CHANNEL	/ in the Channel Up/Dn
					signal.
		positions.
	2.	“Learn” PAGE /	in the Page Up/Dn posi-
		tions.
Enter	Enter Functions (cable boxes, satellite receivers, etc.)
	Some devices have two keys that have “enter” functions. One key is for menus and is often labelled
	SELECT or OK. A second key is for use with number keys for direct channel selection. NetCommand uses
	the same ENTER key for both operations.

When ENTER has a menu or guide function or when the original remote control uses the same key for menus and channel selection:

Learn the ENTER, SELECT, or OK key in the NetCommand Enter learning position.

1.Press MENU or GUIDE to display the device’s menu or guide.

2.Press ENTER within the menu and NetCommand will send the Enter signal for menus.

Enter (digits)	When ENTER is for channel changes, i.e., the original	Press digit key(s) and then press ENTER.
	remote control has a separate ENTER key for this	NetCommand will send the Enter signal for channel
	function):	selection.
	Learn the ENTER key for channel selection in the
	NetCommand Enter (digits) learning position.
	Use this learning position only if the original
	remote control has separate keys for Enter in
	menus and Enter for channel selection.
Cancel	CANCEL as the Cancel or Exit Function	1. Press MENU or GUIDE to display the menu or guide.
	“Learn” the Cancel or Exit function in the	—
		2. Press CANCEL and NetCommand will send the
	NetCommand Cancel learning position	Cancel or Exit signal.
—	The symbol “—” can serve as the separator	—
(separator)	between a digital channel’s main and sub-	Press digit key(s) and press CANCEL . NetCommand
		will send the channel-separator signal.
	channel digits, e.g., digital channel 12-1 (main
	channel is 12, sub-channel is 1).
	“Learn” the channel separator function in the
	NetCommand – (separator) learning position.