Mitsubishi Electronics WD-65C8 manual Setup menu, Clock options

5. TV Menus 45

Setup Menu, continued

Clock

Use either the manual or auto method to set the clock.

Set the clock if you wish to:

• Use the TV’s Timer function.

•Maintain accurate ChannelView listings.

		Setup menu, Clock options
Setup Menu Options
Settings	Manual. To set the clock manually:
Clock	1.	Select Manual.
	2.	Set the time of day.
	3.	Set the date.
	4.	Select your time zone.
	5.	Select either Applies or Ignore for Daylight Savings Time.

Note: If using Manual, each time the time change occurs, you must open this menu and set the TV’s clock ahead or back.

Auto. To set the clock automatically:

1.Select Auto.

2.Select your time zone.

3.Select either Applies or Ignore for Daylight Savings Time.

4.After exiting the menus, tune the TV to an analog station on ANT 1 or ANT 2 carrying XDS data, typically a PBS station.

Note:

•With the Auto setting, the TV’s clock adjusts automatically to daylight savings time.

•The TV’s clock will be reset if you tune to a channel sending incorrect time data. To prevent unwanted clock resets, first use the Auto method to set the clock from a channel sending the correct time, then change the method to Manual.

Time	1.	With the hour highlighted, press		repeatedly to change the hour and the
(Manual		AM/PM indicator. Press and hold to change the hour display quickly.
option only)	2.	Press ENTER to set the hour.
	3.	With the minutes highlighted, press		to change the minutes. Press and
		hold to change the minutes display quickly.
Date	1.	With the month highlighted, press		to select. Press ENTER to set.
(Manual	2.	With the day highlighted, press		to select. Press ENTER to set.
option only)	3.	With the year highlighted, press		to select the current year.
Time Zone	Eastern, Central, Required for both the Manual and Auto methods.
	Mountain,
	Pacific, etc.
Daylight	Applies		Required for both the Manual and Auto methods. Select
Savings	Ignore		the option for your area.
Time