Setup Channel, Enter | Mitsubishi Electronics 642 Series specification

2. TV Menus

Setup, continued

Setup Channel

Ant Air,

Ant Cable

All Channels, Add only new channels

Scan

Edit

You must perform a channel scan to receive digital channels. The scan searches for broad- cast channels and adds them to TV memory. To start channel scan:

1.Highlight one of the input selections based on your connection to the ANT input:

•Air when connected to an indoor or outdoor antenna.

•Cable when connected to direct cable (no cable box)

2.Select the scan type.

•Select All Channels for an initial scan or after moving the TV to an new area with a differ- ent channel line-up.

•Select Add only new channels to search for channels newly broadcasting since the previous scan.

3.Press to highlight SCAN.

4.Press ENTER to start channel memorization.

See below for additional notes on Scan.

After channel scan, Edit lets you add and delete memorized channels. Memorized channels are those you can tune using the CH key. Edit the channel list to limit tuning to channels you watch.

•Press CH/PAGE to jump to the next or previous page of channel numbers.

•Press to move through all channel numbers, one at a time.

Adding/Deleting Channels Using the Channel Edit Menu

•Channels marked with a check are in memory.

•To add or delete a channel from memory, highlight the channel number and press ENTER.

•To add a single digital channel not in the list, see the notes under Scan on this page.

•Digital channels are listed by virtual channel number with the physical channel number shown in small gray text.

-Virtual Channel Number (digital channels only). A channel number sent by a local broadcaster.

-Physical Digital Channel Number. The channel number officially assigned to the actual broadcast frequency; shown on screen in gray text.

Notes on Scan and Channel Memorization

•Channel memorization may take up to 15 minutes to complete.

•To stop channel memorization before completion, press CANCEL. Channels already added are retained.

•When watching TV, press CH to move through memorized channels. Press and hold CH to speed through channels.

•To add a digital channel that does not appear in the Edit menu without performing channel memorization:

1.Look up the physical channel number for the new digital channel. See the website www.antennaweb.org for help.

2.Press INPUT and select the ANT input.

3.Use the number and CANCEL keys to enter the physical channel number followed by “-1” and ENTER. For example, for physical channel 36,

3 6

1 ENTER.

The TV will search for a digital channel on the channel 36 frequency. When it finds the channel, it will:

a.Add the channel to memory.

b.Change the channel number to the virtual channel number sent by the broadcaster.

c.Add to memory any associated sub-chan- nels.

•Rememorize channels if you move the TV to a different geographic area with a different channel line-up.

For assistance call 1(800) 332-2119

642 Series specifications

Mitsubishi Electronics has long been recognized for its commitment to innovation and technology in various sectors, including industrial automation, consumer electronics, and communications. One of the standout products from this brand is the Mitsubishi 642 Series, known for its impressive performance and versatility across numerous applications.

The 642 Series is primarily geared towards industrial automation, which is a critical area in today’s fast-paced manufacturing environment. This series boasts a range of features that set it apart from competitors. A major highlight of the 642 Series is its robust processing power, enabling it to handle complex tasks seamlessly. The series is equipped with advanced microcontroller technology that ensures high-speed data processing and enhanced operational efficiency.

One of the key characteristics of the Mitsubishi 642 Series is its adaptability to various industrial environments. With varying degrees of ruggedness and temperature resistance, this series can operate effectively in challenging conditions. This is particularly essential for manufacturers who may have equipment exposed to dust, moisture, and extreme temperatures.

Additionally, the 642 Series integrates cutting-edge communication technologies. It supports various industrial communication protocols, including Ethernet/IP, CC-Link, and Profibus, ensuring compatibility with a wide array of devices. This flexibility is pivotal for seamless integration into existing workflows, allowing manufacturers to optimize production lines without overhauling their infrastructure.

Another defining feature of the Mitsubishi 642 Series is its user-friendly interface. The products in this series come with intuitive software that simplifies programming and monitoring, reducing downtime during setup and maintenance. This user-oriented design makes it accessible even for those who may not have extensive technical expertise, thus broadening its market appeal.

Safety is paramount in industrial settings, and the 642 Series emphasizes this through multiple safety features. It includes safety circuits and emergency stop functions that comply with global safety standards, thereby ensuring a secure working environment.

In conclusion, the Mitsubishi 642 Series distinguishes itself through its powerful processing capabilities, adaptability to harsh operating conditions, robust communication options, user-friendly interfaces, and comprehensive safety features. This series embodies Mitsubishi Electronics' dedication to providing solutions that enhance productivity and efficiency in industrial automation. Whether used in assembly lines, robotics, or process control, the 642 Series delivers exceptional performance, making it a reliable choice for manufacturers aiming to stay competitive in an ever-evolving market.