Mitsubishi Electronics 3DC-100S manual Connecting Multiple 3D Video Sources, Hdmi Hdmi

Page 7

7

Connecting the Adapter, continued

Connecting Multiple 3D Video Sources

Connect devices with checkerboard output directly to the TV. Enable checkerboard output from the devices if needed.

If using a newer A/V receiver, you may be able to connect devices to the A/V receiver as shown below. The A/V receiver must support HDMI 1.4 and 3D video capabilities.

HDMI HDMI

cables cables

Source A/V

devices receiver

Adapter TV

Notice Concerning Samsung 720p TVs

The adapter is not fully compatible with an A/V receiver when used with Samsung 720p TVs (models HL-T4675S, HL-T5075S, HL-T5675S). Always connect the 3D source device directly to the 3DC-100S adapter if using one of these TV models.

For assistance call 1(800) 332-2119

Image 7
Contents 3DC-100S FCC Information Important Safety InstructionsUse and Compatibility FeaturesFor assistance call 1800 Compatibility with 3DC-100S Adapter Samsung 3D Ready DLP TVsControls and Indicators Battery InstallationConnecting a Single 3D Video Source Connecting the AdapterHdmi cable Hdmi Hdmi Connecting Multiple 3D Video SourcesPicture Troubleshooting Using the AdapterNormal 3D Glasses 3D Glasses Operation Using the 3D GlassesOff Operating Range Troubleshooting Cleaning InstructionsEpilepsy 3D Safety RequirementsTo Obtain Warranty Service Mitsubishi Model 3DC-100S 3D Starter Kit Limited WarrantyMitsubishi Electric Visual Solutions AMERICA, INC Page 3DC-100S Mitsubishi Electric Visual Solutions America, Inc