CONNECTING TO OTHER EQUIPMENT

Connecting to a Computer

System Requirements

The following accessories are included with the camera to make it easy for you to connect to a computer to transfer and manage your images.

USB cable

USB driver software (on CD-ROM)

Data Transfer Cable

Photo Loader application (on CD-ROM)

USB Port Connections

The camera’s USB port and accessories make it easy to connect to a computer equipped with a USB port. First install the USB driver software that comes bundled with the camera on your computer, and then use its special USB cable to make the connection. Once connected, you can view images on your computer's display and store images on its hard disk.

See the separate installation manual for information about how to install the driver software on your computer.

Windows

IBM PC/AT or compatible computer pre-installed with windows 2000 or Windows 98, or pre-installed with Windows 98 and upgraded to Windows 2000

486 or higher CPU (Pentium recommended)

CD-ROM drive (for installa- tion)

Keyboard and mouse or equivalent input device

Available USB port

*Proper operation is not guaranteed under the following conditions.

A computer upgraded from Windows 95 or Windows 3.1 to Windows 98

A computer upgraded from Windows 95 or Windows NT to Windows 2000

*This USB driver does not run un- der Windows 3.1, Windows 95 or Windows NT.

*In the case of Windows 2000, proper operation is guaranteed for Windows 2000 Professional only.

Macintosh

Mac OS 8.5 or higher, Mac OS 8.1 with USB system extentions (iMac Update 1.0 is required)

Power PC G3

CD-ROM drive (for installa- tion)

Keyboard and mouse or equivalent input device

Available USB port

*The USB driver may not run correctly under certain hard- ware configurations.

E-100

Page 100
Image 100
Casio QV-3000EX/Ir manual System Requirements, USB Port Connections, 100, Connecting to a Computer