OTHER RECORDING FUNCTIONS

4.Press MODE and then select .

5.Compose the image on the monitor screen and then press the shutter button about half way.

Auto Focus automatically adjusts in accordance with the movement of the subject.

The message “STAND BY” appears on the monitor screen to indicate that the camera’s buffer memory is accumulating image data. This message remains dis- played for about 10 seconds.

Pressing the shutter button while “STAND BY” is still on the monitor screen records everything that went on in front of the lens during the period from when you pressed the shutter button half way down and when you pressed it all the way down. In this case, the re- cording will be less than 10 seconds long.

IMPORTANT!

Flash is disabled during movie recording.

After “STAND BY” disappears from the monitor screen, the contents of the buffer memory continues to be updated as long as you keep the shutter button depressed about half way.

6.Keep the camera pointed at the action you want to record, and press the shutter button all the way down when you want to end recording.

Pressing the shutter button after “STAND BY” disap- pears from the monitor screen records everything that went on in front of the lens during the 10-second pe- riod before you pressed the shutter button.

NOTE

Movie Storage Capacity

Storage Capacity

Approximately 300KB/

 

second

 

 

Recording Time

30 seconds per movie

 

(NORMAL)

 

10 seconds per movie

 

(PAST)

 

 

E-63

Page 63
Image 63
Casio QV-3000EX/Ir manual Past