
TROUBLESHOOTING
Power Supply
Recording
Symptom |
| Probable Cause |
| Action |
No power | 1. | Batteries not loaded correctly. | 1. | Correctly load batteries (page |
| 2. | Dead batteries | 2. | Replace all four batteries with a set of new ones |
|
|
|
| (page |
| 3. | Wrong AC adaptor | 3. | Use only recommended AC adaptor . |
|
|
|
|
|
Sudden power failure | 1. | Auto Power Off | 1. | Turn power back on. |
| 2. | Low battery power | 2. | Replace all four batteries with a set of new ones |
|
|
|
| (page |
| 3. | Use of manganese batteries. | 3. | Replace manganese batteries with alkaline, |
|
|
|
| lithium or |
|
|
| ||
indicator on LCD | Batteries are about to go dead. | Replace all four batteries with a set of new ones | ||
|
|
| (page | |
No recording when shutter | 1. | The POWER/Function switch is aligned with | 1. | Align the POWER/Function switch with REC. |
button is pressed |
| PLAY. |
|
|
| 2. | Flash unit is charging. | 2. | Wait until flash unit charging is finished. |
| 3. | The message “MEMORY FULL” is on the | 3. | Delete images you no longer need from camera |
|
| monitor screen. |
| memory. |
| 4. | Insufficient memory card capacity or no memory | 4. | Load a memory card. |
|
| card loaded in camera. |
|
|
|
|
|
|
|
Auto Focus cannot focus | 1. | Lens is dirty. | 1. | Clean off the lens. |
the image. | 2. | The object you want to focus is not in the focus | 2. | Aim the camera so the object you want to focus |
|
| frame. |
| is in inside the focus frame. |
| 3. | Conditions make it impossible to obtain proper | 3. | Switch to the Manual Mode and focus manually. |
|
| focus. |
|
|
| 4. | Camera is unsteady or shaking. | 4. | Use a tripod to steady the camera. |
|
|
|
|
|