Casio QV-3000EX/Ir manual Power Supply, Loading Batteries

POWER SUPPLY

The camera features a two-way power supply that lets you use either batteries (AA-size alkaline, lithium or Ni-MH) or household AC current.

Loading Batteries

Be sure that camera power is turned off whenever loading or replacing batteries.

1. On the bottom of the	2	1
camera, slide the battery

3.Load the batteries so their plus (+) and minus

(–)ends are facing as shown in the illustration.

4.Swing the battery com- partment cover closed and then slide it towards the center of the camera to secure it in place (1).

compartment cover lock towards the back of the camera (1) to unlock the cover.

2. Pressing down on the

battery compartment

5.Slide the battery com- partment cover lock to- wards the front of the camera to lock the cover (2).

1

2

cover, slide it towards

the side of the camera to

release it, and then

swing the cover up to

open it (2).

Be sure to use alkaline, lithium or Ni-MHbatteries. Never use manganese batteries (see precautions on the next page).

•Make sure the battery compartment cover is locked se- curely. Failure to do so can result in the cover opening, creating the danger of personal injury and corruption of image data.

E-38