POWER SUPPLY
E-43
Setting SLEEP and AUTO POWER OFF Trigger Times
1.
Align the POWER/Function Switch with REC.
2.
Press MENU.
3.
Select “Options” “Power Save” “Power
Save”.
• “Options” appears on the advanced menu only.
4.
Use [왔] and [왖] to select “Sleep” or “Auto
Power Off”.
5.
Select the trigger time you want to set.
6.
When the settings are the way you want them,
press SET.
7.Select “Exit”.
Power Save Settings
The settings described below let you specify sleep and auto
power off trigger times that help to conserve valuable battery
power.
SLEEP.................. The monitor screen enters a sleep state
if no operation is performed for a speci-
fied amount of time in the Record Mode.
Pressing any button restores full power.
You can specify 30 seconds, 1 minute,
or 2 minutes before the sleep state is
triggered, or you can turn off this setting
entirely.
AUTO
POWER OFF........ Auto Power Off turns off camera power
if no operation is performed for five
minutes in the PLAY Mode, or for two
or five minutes in the REC Mode.
• AUTO POWER OFF takes priority when both SLEEP and
AUTO POWER OFF are both set for a 2-minute trigger
time. This means camera power turns off if no operation is
performed after two minutes.