OTHER RECORDING FUNCTIONS
E-73
Initializing Power On Defaults and Power
Save
Use the following procedure to initialize power on defaults
and the power save settings.
IMPORTANT!
Note that performing the following procedure to initialize
power on defaults also initializes power save trigger
time settings (page E-45).
1.
Perform steps 1 through 3 under “Turning
power on defaults on and off”.
2.
Select “Power Save”, “Mode 1” or “Mode 2”.
3.
Select “Power Save”, “Mode 1” or “Mode 2”.
4.
Select “Restore”.
• The following table shows the power on default status
of each item following the above procedure.
5.
Select “Exit”.
6.
Select the item whose setting you want to
change.
7.
Select “On” or “Off”.
• Repeat steps 6 and 7 for other items if you want.
8.
Select “Exit”.