Set-Up Codes for TVs, Overview | One for All URC 4063 instruction

Feature Function

Installing the Batteries

SETUP

CH+

VOL VOL

CH_

The Red Light (LED) flashes red to show that the remote is working.

The SETUP key is used to program your One For All ® Easy 4.

The GLOW keys: VOL +/- (Volume Up and Down), CH +/- (Channel Up and Down), M (Mute), POWER, TV/VCR,

URC 4063

Easy 4

User Manual

Your One For All ® Easy 4 requires four (4) new AAA alkaline batteries. To install the batteries:

1	On the back of the One For All ® Easy 4,
1	push down on the tab and lift the battery
	cover off.

S	T
E LEC

POWER

TV/VCR ENTER

0 - 9

ENTER and the Digit Keys (0-9) operate the same as on your original remote. These keys are made of a phosphorescent material that Glows-in-the-dark. To activate the “GLOW” Feature, you must expose the GLOW Keys to bright light. The length of time the GLOW Keys remain illuminated will be deter- mined by the length of time the remote is exposed to bright light.

Previous Model Name: Big Easy Select

Overview

Thank you for purchasing the One For All ® Easy 4 universal remote control. Before you can use your new remote, you will need to program it to operate the specific home entertainment components you wish to control. Follow the instructions detailed in this manual to set up your One For All ® Easy 4 and enjoy your new remote control.

The TV, VCR/LD, CBL/SAT, and AUDIO

POWER

Match the + and - marks on the batteries to the + and - marks in the battery case, then insert the batteries.

Press the battery cover back into place.

Test the unit by pressing POWER. If the batteries are inserted correctly, the red light (LED) will blink once.

Features and Functions

The illustration below and the chart immediately after describe the features and functions of the One For All ® Easy 4 universal remote control. Use the drawing to locate each key on the remote, then refer to the chart for a description of the corresponding function each key performs.

SETUP	POWER
CBL/SAT	VCR/LD
CBL/SAT	TV
	MENU +
AUDIO	MENU
	CH+

TV VCR/LD

CBL/SAT AUDIO

STOP

SEE

BELOW

keys are used to select the home entertainment component you want to control.

The MENU key operates the same as the MENU or OSD (On Screen Display) key on your original remote. When you press the MENU key, your One For All ® Remote Control enters the menu mode and enables the CH +/- and VOL +/- keys to navigate through your menu. Pressing one of the device keys will exit the remote control’s menu mode and revert CH +/- and VOL +/- to their original functions. If your original remote control had a SELECT key, for use in your menu, try M (Mute) or ENTER. Please consult the original owners manual of your home entertainment component for more detailed instructions on accessing and navigating your on-screen menus.

MENU	VOL	M	T	VOL MENU
L		S	T	R
L		E LEC		R
		CH_
FAV CH				PREV CH
		MENU –

ENTERTV/VCR

REC

PAUSE

PLAY

REWFF

STOP

The FAV CH (Favorite Channel) key

FAV CHallows you to program your One For All ® Easy 4 with up to 10 of your favorite channels.

The PREV CH (Previous Channel) key

PREV CHoperates the same as the LAST CHANNEL or RECALL key on your original remote.

			The REC (Record), PAUSE, REW
REC PAUSE			(Rewind), PLAY, FF (Fast Forward), and
			STOP keys operate the same as the
	PLAY		keys on your original VCR and CD
REW	PLAY	FF	Player remote. As a safety feature
REW		FF

	on the One For All ® Easy 4, you must
STOP	press the REC key twice.

NOTE: Removing the batteries for more than 15 minutes will require you to reprogram your remote.

Setting Up Your Components

Programming the One For All ® Easy 4 to operate your TV:

Locate the brand name of your TV and then write it in the space below.

TV Brand: ______________________________________

Locate the brand name of your TV in the “SETUP CODES FOR TVs” section. The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program your One For All Easy 4 to operate your TV.

To program the One For All Easy 4 to operate your TV:

1Turn on your TV.

2Press TV and release. Press and hold SETUP until the One For All ® Easy 4’s red

light blinks twice,then release SETUP.

TV SETUP

3Enter the first three-digit TV code listed for your brand in the “Set-Up Codes for TVs” section. If you perform this procedure correctly, the red light will blink twice when you enter the final digit of your code.

4Aim the One For All ® Easy 4 at your TV and press POWER. Your TV should turn off. If your TV does not respond, repeat Steps 2-4, trying each code listed for your brand until you find the one that operates your TV.

5Your One For All ® Easy 4 is now programmed to operate your TV. Write your TV code in the boxes to the left for

future reference.

Remember, if you want to use your One For All ® Easy 4 to operate your TV, press the TV key first.