Installing the Batteries
Your ONE FOR ALL needs 2 new “AA/LR6” alkaline batteries.
1Remove the battery cover from the back of your ONE FOR ALL by pressing down on the tab.
2Match the batteries to the + and - marks inside the battery case, then insert the batteries.
3Press the battery cover back into place.
Important notes:
-In order to avoid having to reprogram your ONE FOR ALL after you remove the batteries, you will need to insert new batteries within 5 minutes. Also it is best that you do not use rechargable batteries.
-On the inside of the battery compartment door you will find a label on which to write your
The Keypad
See picture of ONE FOR ALL TV remote on page 3
1
2
3
MAGIC Key
The MAGIC key is used to set up your ONE FOR ALL 4.
POWER
The POWER key operates the same function it did on your original remote control. The red light (LED - Light Emitting Diode) underneath the POWER key will light up every time a key
is pressed.
MENU Key
4
5
6
The MENU key controls the same function as it did on your original remote.
DIRECTIONAL KEYS
If available on your original remote, these keys will allow you to navigate through the menu mode of your device.
OK
The OK key will confirm your choice in menu operation.
Programme (Channel) +/- Keys
These keys operate in the same way as the keys on your original remote.
7MUTE Key
The Mute key operates the same function it did on your orginal remote control.
8Volume +/- Keys
These keys operate in the same way as the keys on your original remote.
WWW.ONEFORALL.COM | 4 |