Colour and Brightness

Depending on the functions of your original remote control, the ONE FOR ALL may operate the colour and brightness settings of your television.

Colour (+)	= Press and release MAGIC	then hold Volume (+)
Colour (-)	= Press and release MAGIC	then hold Volume (-)
Brightness (+) = Press and release MAGIC		then hold Channel (+)
Brightness (-)	= Press and release MAGIC	then hold Channel (-)

Note: You have 5 seconds to press the Volume or Channel keys for colour or brightness adjustment after pressing MAGIC.

Quick Code Reference

Write down the code for your device in the boxes below and in the battery compartment for quick and easy reference.

Brand	Code
1._________________________	■ ■ ■ ■

Problem & Solution
Problem:	Solution:

Your brand is not listed	Try the search method on page 7.
in the code section?

The ONE FOR ALL does	A) Try all the codes listed for
not operate your	your brand. B) Try the search
device ?	method on page 7.

The ONE FOR ALL is not	You may be using the wrong
performing commands	code. Try repeating the Direct
properly?	Set-Up using another code listed
	under your brand or start the
	search method over again to
	locate the proper code.

Problems changing	Enter the programme number
channels?	exactly as you would on your
	original remote.

The ONE FOR ALL does	Make sure you are using new
not respond after	batteries and are aiming the one
pressing a key?	for all at your device.

The red light does not	Replace batteries with 2 fresh,
blink when you press	new “AA” alkaline batteries.
a key?

8	WWW.ONEFORALL.COM