One for All URC-7542 Advanced Features, Colour and Brightness, Volume Punch-Through, Auto Scan

Page 9

Advanced Features

Colour and Brightness

Depending on the functions of your original remote control, the ONE FOR ALL may operate the colour and brightness settings of your television.

Colour (+)

= Press and release MAGIC

then hold Volume (+)

Colour (-)

= Press and release MAGIC

then hold Volume (-)

Brightness (+) = Press and release MAGIC

then hold Channel (+)

Brightness (-)

= Press and release MAGIC

then hold Channel (-)

Note: You have 5 seconds to press the Volume or Channel keys for colour or brightness adjustment after pressing MAGIC.

Volume Punch-Through

You may be able to use some features of your Television, Video Recorder, Satellite Receiver or Cable Converters at the same time. If you're watching a programme on your Video, you can adjust the volume (a TV function) with- out first pressing the TV key. The chart below lists some of the possibilities:

Last Key Pressed:

You Can Control:

 

 

VCR

TV volume up and down, mute

SAT

TV volume up and down, mute

 

 

To punch through to TV Volume while in VCR or SAT mode press MAGIC* 9 9 3 TV key.

To cancel the ”Volume Punch Through”

Press MAGIC* 9 9 3 Volume(+) (the red light will blink four times).

*Here you must hold down MAGIC until the red light key blinks twice.

Auto Scan

Your ONE FOR ALL 4 comes with a special Auto Scan function which lets you “scan” through every programme available on your device.

For example, to scan the programmes on your TV:

1Aim the ONE FOR ALL 4 at your TV. Press the TV key. Press and release MAGIC then press the MUTE key.

The ONE FOR ALL 4 will send the command to advance through all the programmes available on your Television stopping at each pro- gramme for about three seconds. Remember, you must aim the ONE FOR ALL at your device the entire time you are using Auto scan.

2When you find a programme you would like to watch, simply press any key on the ONE FOR ALL key pad to stop the Auto Scan feature.

Important note: Auto Scan may not work with devices that did not have programme +/- keys on the original remote control.

WWW.ONEFORALL.COM

9

Image 9
Contents URC-7542 About Your ONE for ALL Table of Contents10/11 Keypad Installing the BatteriesMute Key Volume +/- KeysVideo Recorder Keys Teletext and Fastext Keys Setting Up Your Devices Installation Example To set up the ONE for ALL 4 for your television Devices can be found under the following keysSearch Method Using the AUX key Changing a Device KeyQuick Code Reference Volume Punch-Through Advanced FeaturesColour and Brightness Auto ScanONE for ALL Sleeptimer Device SleeptimerSetting the ONE for ALL Sleeptimer Press the device key TV or SATTrouble-Shooting Problem SolutionHelpful Hints 3410805 Customer ServiceIreland Australia South AfricaASA AGBAWA AYRDER CTCDTS ELGICE HCMITC ITSMTC MGAMtec NADRFT RCASBR SEGTEC Adelsound 0004 Intervision 0000 AGS TVAAslf ASTDNR DDCDNT DSTOsat NTCSCS SKRTPS StviUEC XcomPrinted on Recycled Paper 702075