One for All URC-7544 Making your ONE for ALL ready for Sleeptimer, Press the Device key TV or SAT

Page 29

Advanced Features

The ONE FOR ALL Sleeptimer

Your ONE FOR ALL remote comes with an internal Sleeptimer function for those devices (TV or Satellite) which did not come standard with this function. To use the ONE FOR ALL Sleeptimer, follow the steps below.

Making your ONE FOR ALL ready for Sleeptimer:

1

or

 

Press the device key (TV or SAT).

2

Then, press and hold MAGIC until the device

key blinks twice (the device key will blink once,

then twice). Press 970. The device key will blink twice again. It is only necessary to perform steps 1 and 2 once. To set the timer, continue with the steps below.

Setting the ONE FOR ALL Sleeptimer:

It is possible to set the timer for 15, 30, 45 or 60 minutes. To do this, first make sure your TV (or Satellite) is switched on

(not in standby).

Press the Device key (TV or SAT).

(:15)

(:30)

(:45)

(:60)

Then, press and release MAGIC, then press

POWER.

The device key will blink once which indicates the timer is set for 15 minutes. To increase the timer, simply press POWER again (this must be done within 5 seconds). The device key will blink twice indicating the timer is set for 30 minutes (2x 15). You can press POWER to a maximum of four times which will set the timer to 60 minutes.

Once you have set the timer to the desired time, set your ONE FOR ALL remote down, pointing it at your device. When the programmed amount of time has elapsed, the ONE FOR ALL will send the command for Power, hence turning off your device.

Important notes:

-The device key on the ONE FOR ALL will blink every 15 seconds indicating that the remote is in Sleeptimer mode.

-To deactivate the Sleeptimer, simply press any key on the ONE FOR ALL remote.

-Also, it is only necessary to follow steps 1 and 2 above one time. For subse- quent use of the Sleeptimer, simply begin with “Setting the Sleeptimer”.

-To switch the ONE FOR ALL back to Device Sleeptimer (page 26), repeat steps 1-2 above. The device key will blink 4 times.

-Remember, when using the ONE FOR ALL Sleeptimer, you must set the remote so it is pointing to your device.

-The ONE FOR ALL Sleeptimer can be set up for only one device at a time.

WWW.ONEFORALL.COM

27

Page 28 Page 30
Image 29
Page 28 Page 30
Contents URC-7544 URC-7541 Retain For Future ReferenceURC-7541/44 About Your ONE for ALL 4 Digital Table of ContentsURC-7541/44 Quick Set-Up Device key will Aim your ONE for ALL at your device and press device keyPower Key Installing the BatteriesKeypad Function Magic KeyFunction Device Keys Channel, Volume KeysMute Key Directional KeysCustom Satellite Keys Function Teletext KeysSatellite System is switched on InstallationSetting up your Digital Satellite System Setting Up Your Other Devices Example to search for your TV code Search MethodPress and hold Magic until the device key blinks twice Set-Up Codes 4 digits Set-Up CodesQuick Code Reference BSR BPLBTC CCEGBC FNRGEC GPMJEC ITVJMB JVCRFT RBMRCA SEG SBRSEI TECAVP TMKBush 0072 TVA AGS CNTDDC AslfHNE GMIJOK JSROsat NTCSCS SKRUEC TPSXcom 3DLABVolume Punch Through Advanced FeaturesScan Last Key Pressed You Can ControlColour and Brightness MenuOriginal remote used Up, Down, Left and Right Original remote used Red, Green, Yellow and BlueDevice Sleeptimer SleeptimerPress the Device key TV or SAT Making your ONE for ALL ready for SleeptimerSetting the ONE for ALL Sleeptimer Using the AUX Key To programme a Press Changing the mode of a Device KeyProblem Solution Trouble-ShootingHelpful Hints Twice3510805 Customer serviceIreland Australia South AfricaPrinted on Recycled Paper DD-0402 702246

URC-7544, URC-7541, URC-44 specifications

The One for All URC-44, URC-7541, and URC-7544 remote controls are significant entries in the landscape of universal remotes, catering to diverse user needs with their remarkable features and technologies. Each model is designed to simplify the control of various home entertainment devices, offering an ideal solution for those seeking to consolidate their remote functionality into a single gadget.

Starting with the URC-44, this remote control stands out due to its ergonomic design and user-friendly layout. It can control up to four devices including TVs, DVD players, and set-top boxes. One of its key features is the EasySetup function, which simplifies the initial setup process, allowing users to quickly program their devices without the need for extensive technical knowledge. The URC-44 also includes a Smart Mode, enabling users to switch between devices seamlessly, enhancing the overall user experience.

Moving to the URC-7541, this model caters to a wider array of devices, managing up to five different devices. It features a dedicated button for direct access to streaming services, which reflects the growing trend of integrating digital content into home entertainment systems. The URC-7541 is equipped with an advanced code search function, making it easier for users to sync their devices without hassle. Its sleek design and intuitive button layout make it an attractive option for households looking to streamline remote control usage.

The URC-7544 offers even more advanced features, supporting control of up to four devices and including a backlit keypad for ease of use in low-light settings. This model showcases One for All’s commitment to user accessibility by incorporating a learning feature, allowing users to program specific commands from other remotes. The URC-7544 also emphasizes compatibility with a wide range of brands and devices, making it a versatile choice that can adapt as technology evolves.

All three remotes employ One for All's proprietary technology to ensure simplified operation and compatibility with most brands, providing a reliable solution for home entertainment enthusiasts. With an emphasis on straightforward usability, ergonomic designs, and cutting-edge features, the URC-44, URC-7541, and URC-7544 exemplify the capabilities and innovation common to One for All products, thus enriching the user experience within the home entertainment ecosystem.
Top Page Image Contents