Home Theater

The HOME THEATER mode key allows you to bring the most commonly used functions of your home theater components together on one mode key. By doing this you can configure the keypad to meet your specific home theater needs. You can define by key grouping, which component should be controlled. The steps below will guide you through programming the Home Theater key.

You will be able to divide your ONE FOR ALL 6 keypad into five Groups, each Group controlling a different device.

Note: The HOME THEATER key can only be set up after you have all your devices working with the ONE FOR ALL 6.

The 5 possible Groups to select are:

Key		The Key Group that	Available Device keys
Group		will be selected, consists of:	for each Group are:
Group	1	Play, Stop, FF, REW, Record,	VCR, DVD,
		SP/LP, Auto	CD, AUD
Group	2	Volume (+), Volume (-),	AUD, TV, VCR,
		Mute	SAT, CD
Group	3	Channel (+), Channel (-),	TV, VCR,
		Power	SAT, DVD
Group	4	1 - 9, 10, 0, AV	TV, VCR, SAT

Group	5	Menu, Up, Down, Left, Right,	SAT, TV, VCR,
		OK, Exit	AUD, DVD

The BOLD keys ( Play, Volume (+), Channel (+), 1, Menu ) are the keys to press to select a Group.

For example: If you press the Play key, you will select Group 1.

If for example, you choose to select Group 4 by pressing the number 1 key, you will not be able to combine this with for example, the AUD key becau- se the AUD key is not available in Group 4. The ONE FOR ALL 6 will ignore it. The AUD key will not blink twice when you press it.

If for example, you press the VCR key afterwards, the VCR key will blink twice because it is available in Group 4. If a Group is selected multiple times, the latest entry overwrites previous entries.