Search Method | One for All URC-7562 specification

As soon as your television turns off, press MAGIC store the code.

Press the TV key on your ONE FOR ALL 6.

Press and hold down MAGIC until the ONE FOR ALL 6’s TV key blinks twice (The TV key will blink once and then twice).

Press 9 9 1. The TV key will blink twice.

Now slowly, alternate between TV and POWER, over and over, until your television turns off. You may have to press these keys many times (up to 200!), so please be patient. Remember to keep pointing the ONE FOR ALL 6 at your television when you press these keys.

The Search Method

If your device does not respond to the ONE FOR ALL 6 after you have tried all the codes listed for your brand, try searching for your code. The Search Method allows you to find the code for your device by scanning through all the codes contained in the memory of the ONE FOR ALL 6. The Search Method may also work if your brand is not listed at all.

Example: To search for your TV code:

1Switch your television on (not on standby) and aim your ONE FOR ALL at your TV.

The ONE FOR ALL remote should now be ready to operate your device. Turn your device back on and try all the remote’s functions to ensure they are working properly. If some of the ONE FOR ALL’s commands are not operating correctly, try the search method again. You may be using the wrong code.

Important notes:

-To search for the code for another device follow the instructions above only press the appropriate device key instead of TV during steps 2 and 5.

-If the original remote control of your device does not have a POWER key, press PLAY instead of POWER during step 5.

Once you have Set-Up your ONE FOR ALL 6, you can blink back your SET-UP CODE for future reference.

Example: To blink out your Television code:

Press TV once.

Press and hold MAGIC until the ONE FOR ALL 6’s TV key blinks twice (The TV key will blink once and then twice).

Press 9 9 0. The TV key will blink twice.

For the first digit of your four-digit code, press 1 and count all the red blinks. If there are no blinks, the digit is "0".

For the second digit, press 2 and count all the red blinks. If there are no blinks, the digit is "0".

6	For the third digit, press 3 and count all the red blinks.
	If there are no blinks, the digit is "0".
7	For the fourth digit, press 4 and count all the red blinks.
	If there are no blinks, the digit is "0". Now you have your
	four-digit code.

Make sure you write your Television code in the boxes provided in the battery compartment and on page 8 for easy future reference.

Important note: To blink back the code for your other devices press the appropriate device key during step 1.