One for All URC-7040 manual Changing the Mode of a Device Key

Changing the Mode of a Device Key

With your ONE FOR ALL 4 Remote it is possible to change the mode of a device key. This is useful if you want the ONE FOR ALL 4 to operate more than one of the same device types such as two Televisions or two Video Recorders for example.

Example: to program a second Video Recorder on the SAT key, you need to change the SAT key into a VCR key.

1

MAGIC

Press and hold down the MAGIC key until the red light blinks twice (the red light will blink once then twice).

2 9 9 2 Press 9 9 2. The red light will blink twice.

3VCRPress the VCR key (the device mode you want to duplica-

te).

4

SAT

Now press the SAT key (the device mode key you want changed) and the red light will blink twice.

The SAT key of the ONE FOR ALL 4 is now ready to be set-up for your video cassette recorder. To enter the Set-up code for your second VCR, proceed with the setup procedure on page 6 remembering to use VCR codes for the SAT key.

Resetting a Device Key

Example: to reset the SAT key back to its original mode.

1Hold down the MAGIC key until the red light blinks twice (the red light will blink once then twice).

2Press 9 9 2. The red light will blink twice.

3Press the SAT key (the device mode you want to reset).

4Now press the SAT key again to confirm and the red light will blink twice.

Now your SAT key of the ONE FOR ALL 4 is ready to be programmed for your satellite receivers and cable converters again. To enter the Set-up code for your satellite receiver or cable converter, proceed with the setup proce- dure on page 6.

WWW.ONEFORALL.COM 9