JVC SL42B-C manual TV Operation TV Channels, Changing the Channel, Browsing Channels

TV Operation – TV Channels

Changing the Channel

On the remote control, use the number keys to select a channel.

NOTE: When a channel is selected with the number keys, there will be a short delay before the TV changes the channel. To change the channel immediately, press OK after selecting a channel.

Browsing Channels

To increase or decrease the channel:

1On the remote control, press button

2At rear of TV, press the CHANNEL UP or CHANNEL DOWN buttons

Selecting Analog Channels

10~99 Press the 2 digits in order. For example: to select channel 15, press 1, 5, and then press OK.

100~135 Press the 3 digits in order. For example: to select channel 130, press 1, 3, 0, and then press OK.

Selecting Digital Channels

Press the first two or three digits, press the – button, and then press the remaining digit(s). For example: to select channel 15-1, press 1, 5, - ,1, and then press OK.

1~9	Press 1~9 as needed. For example: to select
	channel 2, press 2, then press OK.