|
|
| Troubleshooting |
|
|
|
|
Poor Reception on Some Channels |
| ∙ | The channel or cable TV broadcast is experiencing problems. Tune to another channel. |
|
| ∙ Make sure that channels are set into memory | |
|
| ∙ The network signal is weak. Adjust the antenna to receive a better reception | |
|
| ∙ Check for possible sources of interference. | |
The Remote Control does not work |
| ∙ | Batteries may be weak, dead, or inserted incorrectly. |
|
| ∙ Point the remote control directly at the IR sensor on the TV with an angle of 35 degrees. | |
|
| ∙ Remove any obstacles between the remote control and the TV. | |
|
| ∙ Remote control is out of range. Move closer to the TV. | |
TV Shuts Off |
| ∙ | Sleep timer is set. |
|
| ∙ | Power is interrupted. |
No CATV Reception |
| ∙ | Check all cable TV connections. |
|
| ∙ Set the TV Mode in Channel menu. | |
|
| ||
Closed Caption is not activated |
| ∙ | The channel/program is not a closed caption broadcast. Try another channel. |
|
| ∙ Enable Closed Caption in the Menu. | |