JVC HD-70FN97, HD-70FH97 manual Connecting to the computer, Looking at the images from a computer

Quick Setup

Connecting to the computer

(HD-56FH97, HD-61FH97, HD-70FH97, HD-56FN97, HD-61FN97 and HD-70FN97 ONLY)

This TV can be used as a computer screen. Use a commercially available D-SUB cable to connect the TV's PC INPUT terminal to the computer's analog RGB output terminal. If you want to listen to the sound from the computer, use a commercially available RCA cable to connect the INPUT-3 audio input terminal to the computer's audio output terminal.

TV Rear Panel

S-VIDEO	VIDEO	R - AUDIO - L
			INPUT-1
OVER
	VIDEO	R - AUDIO - L
			INPUT-2
S-VIDEO	VIDEO	R - AUDIO - L
OVER			INPUT-3
		AUDIO
			HDMI 1
CENTER CHANNEL INPUT
	Y	Pb	Pr
			INPUT-1
	Y	Pb	Pr
			INPUT-2
S-VIDEO	VIDEO	R	L
MONITOR	AUDIO	R	L
/RECOUT
	OUTPUT
		INPUT-3
75Ω		PC IN
(VHF/UHF)
		(D-SUB)

Notes:

•Refer to your computer manual for a detailed explanation of the connections concerning your computer.

•Make sure that the connectors are facing the correct way when connecting.

•After connecting, tighten the two screws to fix the connectors in place.

Looking at the images from a computer

After starting the computer, press the INPUT button to choose INPUT-3. You can listen to the sound when the sound from the computer is connected to the INPUT-3 AUDIO input terminal.

Notes:

•When the sound from the computer is connected to INPUT-3 by choosing external input INPUT-3, the sound from the computer can be listened to, but the images from the computer cannot be seen.

25