Sony MHC-GRX10AV operating instructions Precautions

Page 49

Additional Information

Precautions

On operating voltage

Before operating the system, check that the operating voltage of your system is identical with the voltage of your local power supply.

On safety

•The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.

•Unplug the system from the wall outlet (mains) if it is not to be used for an extended period of time. To disconnect the cord (mains lead), pull it out by the plug. Never pull the cord itself.

•Should any solid object or liquid fall into the component, unplug the stereo system and have the component checked by qualified personnel before operating it any further.

•The AC power cord must be changed only at the qualified service shop.

On placement

•Place the stereo system in a location with adequate ventilation to prevent heat build-up in the stereo system.

•Do not place the unit in an inclined position.

•Do not place the unit in locations where it is;

—Extremely hot or cold

—Dusty or dirty

—Very humid

—Vibrating

—Subject to direct sunlight

On operation

•If the stereo system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the CD player. Should this occur, the system will not operate properly. Remove the CD and leave the system turned on for about an hour until the moisture evaporates.

•When you move the system, take out any discs.

If you have any questions or problems concerning your stereo system, please consult your nearest Sony dealer.

Notes on CDs

•Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out.

•Do not use solvents such as benzene, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.

•Do not expose the CD to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight.

Cleaning the cabinet

Use a soft cloth slightly moistened with mild detergent solution.

To save a tape permanently

To prevent a tape from being accidentally recorded over, break off the cassette tab from side A or B as illustrated.

Detector slots

Tab of side B

Tab of side A

Side A

Break off the cassette tab of side A

If you later want to reuse the tape for recording, cover the broken tab with adhesive tape. However, be careful not to cover the detector slots which allow the tape player to automatically detect the type of tape.

Detector slots

continued

49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Mini Hi-Fi Component System Page Table of Contents Connect the FM/AM antennas Hooking up the main unitJack type B Jack type aWhen carrying this system Setting up your speakersPositioning the speakers Inserting two size AA R6 batteries into the remoteSetting up your speakers Connecting the speakersTo attach the speaker pads 1Connect the front speakersConnect the rear surround speakers Connect the power cord to a wall outlet Adjusting the speaker volumeConnect the center surround speaker Setting the time Setting the time Presetting radio stationsPress ENTER/NEXT Turn the jog dial to set the minute Press ENTER/NEXTTo change the preset number To tune in a station with a weak signalTo change the AM tuning interval Press Tuner MemoryConnecting audio components Connecting optional AV componentsConnecting an MD deck for digital recording Connecting an MD deck for analog recordingConnecting outdoor antennas Connecting a VCRConnecting a super woofer speaker FM antennaAM antenna Connecting optional AV componentsNormal play Playing a CDPress ¤ and place up to two CDs on the disc tray Press one of the Disc 1~3 buttonsDo this Playing a CDCD Synchro Recording Recording a CDTo stop recording Listening to the radio Preset TuningRecording from the radio To listen to non-preset radio stations from front panel onlyRecording from the radio Playing a tapePress rREC Press Tape a or Tape B Deck a or Deck B »á on the remote Press ¤and insert a recorded tape in deck a or BPlaying a tape Recording from a tapeSearching for the beginning of a track AMS High-speed DubbingTo stop dubbing Press Display during playback Using the CD displayPlaying the CD tracks repeatedly To cancel Repeat PlayRepeat Play Shuffle Play To cancel Shuffle PlayPress CD P To select a desired CDProgram Play Programming the CD tracksTo cancel Non-Stop Play To cancel Program PlayPlaying CDs without interruption Programming the CD tracksStart playing the source to be recorded Recording on a tape manuallyProgram Edit Recording a CD by specifying track orderSelecting tape length automatically To cancel Program EditTo check the order Tape Select EditFlashing part of a CD Looping part of a CDLoop FlashTo adjust the volume of the pads Using the drum padsTap drum PAD a or B to produce the respective sound To change the drum soundTo cancel the beat Using the beat functionsTo change the beat volume To change the speedUsing the Auto BPM function Using the Beat JAM functionStart playing a source Select a beat pattern Press Beat ON/OFF to stop the beat function Press Auto BPMTo listen through the headphones Adjusting the soundFor a powerful sound Groove To reinforce bass DbfbSelecting the audio emphasis To cancel the effectMusic menu options To change the spectrum analyzer displaySelecting surround effects Enjoying Dolby Pro Logic Surround sound To cancel the Dolby Pro Logic Surround soundTurn the jog dial to adjust level Adjusting the graphic equalizerRepeat steps 3 Press ENTER/NEXT when finished Personal file Making a personal audio emphasis fileTo call up the personal file 4,5 Using the Radio Data System RDSReceiving RDS broadcasts Locating a station by program type PTYList of program types PTY To cancel PTY searchSinging along Karaoke When you are doneMixing and recording sounds Wake-up Timer Sleep TimerFalling asleep to music Waking up to musicTo check the setting Turn off the powerTo cancel the timer operation Turn jog dial to select Daily 1 or 2, then press ENTER/NEXTInsert a recordable tape Turn off the power Timer-recording radio programsTurn jog dial to select REC, then press ENTER/NEXT Set the time to start recordingPrecautions Precautions TroubleshootingGeneral CD Player SpeakersTape Deck TroubleshootingTuner Amplifier section SpecificationsCD player section SpecificationsTape player section Tuner sectionFor customers in Canada SpeakerGeneral Y, Z Index

MHC-GRX10AV specifications

The Sony MHC-GRX10AV is a powerhouse audio system designed for those who seek both performance and versatility in their home entertainment setups. This all-in-one audio solution is crafted to deliver an immersive sound experience that complements any home environment. With its robust design and advanced technologies, the MHC-GRX10AV is tailored for audiophiles and casual listeners alike.

One of the standout features of the MHC-GRX10AV is its powerful sound output. The system boasts a high total output power, allowing it to fill large spaces with rich, balanced sound. This is achieved through multiple speaker units that work in tandem, ensuring clarity across various frequencies. Whether you're listening to music, watching movies, or playing games, the audio remains crisp and full-bodied.

The MHC-GRX10AV is equipped with advanced technology, including Digital Sound Enhancement Engine (DSEE). This feature intelligently restores the high-frequency sounds lost during audio compression, resulting in a clearer and more dynamic listening experience. It’s perfect for those who often listen to streaming music services or compressed audio formats.

Another impressive aspect of the MHC-GRX10AV is its connectivity options. Featuring Bluetooth technology, this sound system allows for seamless wireless audio streaming from compatible devices. Users can easily connect their smartphones or tablets to enjoy their favorite playlists without the hassle of wires. Additionally, the system also supports multiple audio inputs, including USB and AUX, making it versatile enough to connect to various media sources.

For those who enjoy social gatherings, the MHC-GRX10AV includes a built-in DJ feature. This allows users to mix tracks and add effects to make parties more lively. Furthermore, karaoke enthusiasts will appreciate the dedicated mic inputs, turning any space into a music stage.

The MHC-GRX10AV is not only designed for performance but also boasts an aesthetic appeal that can fit into any decor. Its sleek and modern design, combined with customizable LED lights, enhances the overall ambiance of any room, making it perfect for both casual settings and more formal occasions.

In conclusion, the Sony MHC-GRX10AV stands out as a versatile audio system equipped with powerful sound output, innovative technologies, and a range of connectivity options. Whether you’re hosting a party, enjoying a movie night, or simply listening to music, this system is designed to elevate the audio experience to new heights, making it a worthy addition to any home entertainment setup.
Top Page Image Contents