Sony MHC-GRX10AV operating instructions Specifications, Amplifier section

Page 53

Specifications

Amplifier section

MHC-RX110AV (Canadian models):

Front Speaker:

Continuous RMS power output (reference) 120 + 120 watts (8 ohms at 1 kHz, 10% THD)

Total harmonic distortion less than 0.07%

(8 ohms at 1 kHz, 65 W)

Center Surround Speaker:

Continuous RMS power output (reference) 25 watts

(8 ohms at 1 kHz, 10% THD)

Rear Surround Speaker:

Continuous RMS power output (reference) 12.5 + 12.5 watts (16 ohms at 1 kHz, 10% THD)

MHC-RX110AV (European and Russian models): Front Speaker:

DIN power output (rated) 80 + 80 watts

(8 ohms at 1 kHz, DIN)

Continuous RMS power output (reference) 100 + 100 watts (8 ohms at 1 kHz, 10% THD)

Music power output (reference)

170 + 170 watts (8 ohms at 1 kHz, 10% THD)

Center Surround Speaker:

DIN power output (rated) 20 watts

(8 ohms at 1 kHz, DIN)

Continuous RMS power output (reference) 25 watts

(8 ohms at 1 kHz, 10% THD)

Music power output (reference) 45 watts

(8 ohms at 1 kHz, 10% THD)

Rear Surround Speaker:

DIN power output (rated) 10 + 10 watts

(16 ohms at 1 kHz, DIN)

Continuous RMS power output (reference) 12.5 + 12.5 watts

(16 ohms at 1 kHz,

10% THD)

Music power output (reference)

20 + 20 watts

(16 ohms at 1 kHz,

10% THD)

MHC-GRX10AV (Other models):

The following measured at AC 120, 220, 240 V 50/60 Hz

Front Speaker:

DIN power output (rated) 105 + 105 watts

(6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference) 130 + 130 watts (6 ohms at 1 kHz, 10% THD)

Center Surround Speaker:

DIN power output (rated) 20 watts

(8 ohms at 1 kHz, DIN)

Continuous RMS power output (reference) 25 watts

(8 ohms at 1 kHz, 10% THD)

Rear Surround Speaker:

DIN power output (rated) 10 + 10 watts

(16 ohms at 1 kHz, DIN)

Continuous RMS power output (reference) 12.5 + 12.5 watts

(16 ohms at 1 kHz,

10% THD) Peak music power output (reference)

2000 watts

Inputs

 

VIDEO IN:

voltage 250 mV,

(phono jacks)

impedance 47 kilohms

MD IN:

voltage 450 mV,

(phono jacks)

impedance 47 kilohms

MIX MIC: (phone jack)

sensitivity 1 mV,

Outputs

impedance 10 kilohms

 

MD OUT:

voltage 250 mV

(phono jacks)

impedance 1 kilohms

PHONES:

accepts headphones of 8

(stereo phone jack)

ohms or more

FRONT SPEAKER:

accepts impedance of 8 to

 

16 ohms

REAR SURROUND SPEAKER:

 

accepts impedance of 16

 

ohms

CENTER SURROUND SPEAKER:

 

accepts impedance of 8

 

ohms

SUPER WOOFER:

Voltage 1 V, impedance 1

 

kilohms

continued

53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents Mini Hi-Fi Component System Page Table of Contents Connect the FM/AM antennas Hooking up the main unitJack type B Jack type aWhen carrying this system Setting up your speakersPositioning the speakers Inserting two size AA R6 batteries into the remoteSetting up your speakers Connecting the speakersTo attach the speaker pads 1Connect the front speakersConnect the rear surround speakers Connect the center surround speaker Adjusting the speaker volumeConnect the power cord to a wall outlet Setting the time Setting the time Presetting radio stationsPress ENTER/NEXT Turn the jog dial to set the minute Press ENTER/NEXTTo change the preset number To tune in a station with a weak signalTo change the AM tuning interval Press Tuner MemoryConnecting audio components Connecting optional AV componentsConnecting an MD deck for digital recording Connecting an MD deck for analog recordingConnecting outdoor antennas Connecting a VCRConnecting a super woofer speaker FM antennaAM antenna Connecting optional AV componentsNormal play Playing a CDPress ¤ and place up to two CDs on the disc tray Press one of the Disc 1~3 buttonsDo this Playing a CDTo stop recording Recording a CDCD Synchro Recording Listening to the radio Preset TuningRecording from the radio To listen to non-preset radio stations from front panel onlyPress rREC Playing a tapeRecording from the radio Press Tape a or Tape B Deck a or Deck B »á on the remote Press ¤and insert a recorded tape in deck a or BPlaying a tape Recording from a tapeSearching for the beginning of a track AMS High-speed DubbingTo stop dubbing Press Display during playback Using the CD displayRepeat Play To cancel Repeat PlayPlaying the CD tracks repeatedly Shuffle Play To cancel Shuffle PlayPress CD P To select a desired CDProgram Play Programming the CD tracksTo cancel Non-Stop Play To cancel Program PlayPlaying CDs without interruption Programming the CD tracksStart playing the source to be recorded Recording on a tape manuallyProgram Edit Recording a CD by specifying track orderSelecting tape length automatically To cancel Program EditTo check the order Tape Select EditFlashing part of a CD Looping part of a CDLoop FlashTo adjust the volume of the pads Using the drum padsTap drum PAD a or B to produce the respective sound To change the drum soundTo cancel the beat Using the beat functionsTo change the beat volume To change the speedUsing the Auto BPM function Using the Beat JAM functionStart playing a source Select a beat pattern Press Beat ON/OFF to stop the beat function Press Auto BPMTo listen through the headphones Adjusting the soundFor a powerful sound Groove To reinforce bass DbfbSelecting the audio emphasis To cancel the effectMusic menu options To change the spectrum analyzer displaySelecting surround effects Enjoying Dolby Pro Logic Surround sound To cancel the Dolby Pro Logic Surround soundRepeat steps 3 Press ENTER/NEXT when finished Adjusting the graphic equalizerTurn the jog dial to adjust level To call up the personal file Making a personal audio emphasis filePersonal file 4,5 Using the Radio Data System RDSReceiving RDS broadcasts Locating a station by program type PTYList of program types PTY To cancel PTY searchSinging along Karaoke When you are doneMixing and recording sounds Wake-up Timer Sleep TimerFalling asleep to music Waking up to musicTo check the setting Turn off the powerTo cancel the timer operation Turn jog dial to select Daily 1 or 2, then press ENTER/NEXTInsert a recordable tape Turn off the power Timer-recording radio programsTurn jog dial to select REC, then press ENTER/NEXT Set the time to start recordingPrecautions General TroubleshootingPrecautions CD Player SpeakersTuner TroubleshootingTape Deck Amplifier section SpecificationsCD player section SpecificationsTape player section Tuner sectionGeneral SpeakerFor customers in Canada Y, Z Index

MHC-GRX10AV specifications

The Sony MHC-GRX10AV is a powerhouse audio system designed for those who seek both performance and versatility in their home entertainment setups. This all-in-one audio solution is crafted to deliver an immersive sound experience that complements any home environment. With its robust design and advanced technologies, the MHC-GRX10AV is tailored for audiophiles and casual listeners alike.

One of the standout features of the MHC-GRX10AV is its powerful sound output. The system boasts a high total output power, allowing it to fill large spaces with rich, balanced sound. This is achieved through multiple speaker units that work in tandem, ensuring clarity across various frequencies. Whether you're listening to music, watching movies, or playing games, the audio remains crisp and full-bodied.

The MHC-GRX10AV is equipped with advanced technology, including Digital Sound Enhancement Engine (DSEE). This feature intelligently restores the high-frequency sounds lost during audio compression, resulting in a clearer and more dynamic listening experience. It’s perfect for those who often listen to streaming music services or compressed audio formats.

Another impressive aspect of the MHC-GRX10AV is its connectivity options. Featuring Bluetooth technology, this sound system allows for seamless wireless audio streaming from compatible devices. Users can easily connect their smartphones or tablets to enjoy their favorite playlists without the hassle of wires. Additionally, the system also supports multiple audio inputs, including USB and AUX, making it versatile enough to connect to various media sources.

For those who enjoy social gatherings, the MHC-GRX10AV includes a built-in DJ feature. This allows users to mix tracks and add effects to make parties more lively. Furthermore, karaoke enthusiasts will appreciate the dedicated mic inputs, turning any space into a music stage.

The MHC-GRX10AV is not only designed for performance but also boasts an aesthetic appeal that can fit into any decor. Its sleek and modern design, combined with customizable LED lights, enhances the overall ambiance of any room, making it perfect for both casual settings and more formal occasions.

In conclusion, the Sony MHC-GRX10AV stands out as a versatile audio system equipped with powerful sound output, innovative technologies, and a range of connectivity options. Whether you’re hosting a party, enjoying a movie night, or simply listening to music, this system is designed to elevate the audio experience to new heights, making it a worthy addition to any home entertainment setup.
Top Page Image Contents