One for All SV-1716 instruction manual Product, Transmitter unit, Receiver unit

The Product

The Audio Video Sender (SV-1716) is a solution for distributing audio and video signals to every place in the house without the need of wires. The AV Sender gives you the possibility to view any video source (satellite receiver, video recorder, camcorder, DVD player, digital or analogue Set-Top Box or Pay-TV decoder box) on your second TV in your home.

The One For All AV Sender (SV-1716) package contains:

-TRANSMITTER unit

-RECEIVER unit

-Remote Control Extender Eye

-Infra-red (IR) Eye

-Two Power adapters

The TRANSMITTER sends the audio and video signals from the source device (VCR, DVD, SATELLITE/ CABLE BOX, CAM- CORDER, etc) by 2.4 GHz to the RECEIVER that is connected to the destination device. The Remote Control Extender sends the IR signal in the opposite direction (from RECEIVER unit to TRANSMITTER unit) at a frequency of 433.92 MHz.

TRANSMITTER unit

The TRANSMITTER operates on 9 Volts DC 300mA that is supplied by the AC/DC Adapter (included in package). The Audio and/or video signals are transformed to a 2.4GHz frequency that will be sent via the built-in antenna.

Furthermore the TRANSMITTER transforms the Remote Control Extender signal (at 433.92 MHz) back to an IR command.

RECEIVER unit

The RECEIVER operates on 9 Volts DC 300mA that is supplied by the AC/DC Adapter (included in package). The high frequency signal (2.4GHz) received by this unit are captured by the built-in antenna of the RECEIVER unit and will be transformed into the original audio and video signals.

Secondly a Remote Control Extender can be controlled too. When an infra red signal is Received by the Remote Control Extender, it will transform the IR command to 433.92 MHz and can be sent through walls and ceilings.

Please note that this feature is only accessable for devices that are controlled via IR (infra-red) signals at a frequency of 30 - 60 kHz This feature does not support the 2-way IRDA waveform. If you are unsure of the details of the remote control (IR) output, please refer to the manual of the original device or contact your cable supplier.