8. Maintenance and service
Change the module lamp immediately when the lamp life reaches 1500 hrs to maintain the best projection image.
8.1 Replacing the lamp module
When the lamp is within 30 hours of maximum lamp life, projector will display a warning automatically stating, “Lamp has reached its end of life! Lamp replacement is suggested!”. When this message appears, please change the lamp immediately.
To replace the lamp module:
1.Turn off the projector and wait for the fan to stop.
2.Turn off the main power switch, and disconnect the power cord and all cables.
3.Let the projector lamp cool down completely (approximately 30 minutes).
4.Use screwdriver to loosen the screws of lamp access panel and lamp module.
5.Take out the lamp module.
6.Gently process the new lamp module into the lamp bay, then replaces the lamp module retaining screws.
7.Replace the lamp bay access panel, and then replace the access panel screw.
Use screwdriver to loosen the lamp access panel screws, and then press down the access panel lock to remove the access panel.
Remove the three lamp module retaining screws, unsnap the lamp removal handle to change the lamp module.
25