Sony MHC-GR8 manual Press § Eject and insert a recorded tape in deck a or B, Press ·

1 Press § EJECT and insert a recorded tape in deck A or B.

With the side		…
	» Æ	„
you want to		�
play facing
forward
	⁄

2 Press EDIT/DIRECTION repeatedly to select A to play one side. Select a* to play both sides.

To play both decks in succession, select RELAY (relay play).**

3 Press · .

Press ª to play the reverse side. The tape starts playing.

*The deck stops automatically after repeating the sequence five times.

**Relay play always follows the following sequence:

Deck A (front side), Deck A (reverse side), Deck B (front side), Deck B (reverse side).

To	Do this
Stop play	Press	(or p on the
	remote).
Pause (Deck B only)	Press	. Press again to
	resume play.
Fast-forward	Press ‚	while playing
	the front side or º while
	playing the reverse side.
Rewind	Press º	while playing
	the front side or ‚ while
	playing the reverse side.
Remove the cassette	Press § EJECT.
Adjust the volume	Turn VOLUME (or press
	VOL +/– on the remote).

Tips

•Pressing · or ª when the power is off automatically turns the power on and starts tape playback if there is a tape in the deck (One Touch Play).

•You can switch from another source to the tape deck just by pressing · or ª (Automatic Source Selection).

•When you want to reduce the hiss noise in low- level high-frequency signals, press REPEAT/ DOLBY NR so that “DOLBY NR B” appears.

•When dubbing tapes originally recorded with Dolby NR B, the dubbed tape is automatically played with Dolby NR B.

Basic Operations

17