Eiki LC-XE10 instruction manual Top, 1!2

Part Names and Functions

Top

This projector has control buttons and indicators on its top.

qw

y

e	u
r	i
t

o!0 !1!2

q POWER ON–OFF button	i LAMP REPLACE indicator
Turns the projector on or off. (p19)	Turns yellow when the life of the projection lamp draws to an
	end. (p45, 49)

wAUTO SET UP button

Operate AUTO SET UP function. (p21)

eZOOM/FOCUS button

Select ZOOM or FOCUS function. (p20)

rIMAGE button

Select image level. (p30, 36)

tAUTO PC ADJ. button

oPOINT (Up/Down/Left/Right ) button

Selects an item or adjusts value in the On-Screen Menu. These are also used to pan the image in the Digital zoom +/– mode. (p32)

Point Left/Right button are used as VOLUME +/– button. (p22)

!0MENU button

Opens or closes the On-Screen Menu. (p23)

Operates the AUTO PC Adjustment function. (p27)

yPOWER indicator

Flashes red until the projector gets ready to be turned on. It turns red when the projector is in the stand-by mode. It remains green while the projector is under operation. (p49)

uWARNING indicator

Lights red when the projector detects abnormal condition. This also flashes red when the internal temperature of the projector exceeds the operating range. (p43, 49)

!1SELECT button

Executes the item selected. It is also used to expand / compress the image in Digital zoom +/– mode. (p32)

!2INPUT button

Selects input source. (p25, 33)

11