Eiki LC-XE10 Video Input, Input Source Selection Video, S-Video, Y, Pb/Cb, Pr/Cr

Page 33

Video Input

Input Source Selection {Video, S-Video, (Y, Pb/Cb, Pr/Cr)}

Direct Operation

Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control.

Before using these buttons, correct input source should be selected through menu operation as described below.

INPUT button

Video

Computer 1

Computer 2

VIDEO button Video

When Monitor out is selected at the Terminal item in the Setting Menu, Computer 2 is not displayed. See “Terminal” item on page 40.

Menu Operation

1

Press the MENU button and the On-Screen Menu will appear.

Press the Point Left/Right button to move the red frame pointer

 

to the Input Menu icon.

2

Press the Point Down button to move the red arrow pointer to

Video and then press the SELECT button. The Source Select

 

Menu will appear.

3

Move the pointer to the source that you want to select and then

 

press the SELECT button.

 

 

When selecting Auto, the projector automatically detects

 

Auto

 

incoming video signal, and adjusts itself to optimize its

 

 

 

 

performance. The projector selects connection in the

 

 

following order:

 

 

1st Y, Pb/Cb, Pr/Cr

 

 

2nd S-Video

 

 

3rd Video

 

 

The Y, Pb/Cb, Pr/Cr jacks has priority over the S-VIDEO

 

 

jack under the condition of connecting both the Y, Pb/Cb,

 

 

Pr/Cr jacks and the S-VIDEO jack.

 

 

The S-VIDEO jack has priority over the VIDEO jack under

 

 

the condition of connecting both the S-VIDEO jack and

 

 

the VIDEO jack.

 

 

When video input signal is connected to the VIDEO jack,

 

Video

 

select Video.

 

 

 

 

When video input signal is connected to the S-VIDEO

S-Video

jack, select S-Video.

 

 

Y, Pb/Cb, Pr/Cr

When video input signal is connected to the Y, Pb/Cb, Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.

NOTE

See “Computer Input” on page 25 for a signal compatible with HDCP.

Input Menu

 

Move the pointer to

 

 

VIDEO

Video and press the

SELECT button.

Source Select Menu (VIDEO)

Move the pointer to the source that you want to select and press the SELECT button.

When Monitor out is selected at the Terminal item in the Setting Menu, Computer 2 is not displayed.

See “Terminal” item on page 40.

33

Image 33
Contents Model LC-XE10 Table of Contents Risk of Electric Shock Do not Open To the OwnerVoor de klanten in Nederland Safety InstructionsInstalling the Projector in Proper Position Safety InstructionsAir Circulation Moving the ProjectorFederal Communication Commission Notice ComplianceFor Continental Europe ComplianceFor the U.S.A. and Canada 200 240 V ACFeatures and Design Front Back Bottom Part Names and FunctionsTerminal Part Names and Functions1!2 TopZoom Freeze Remote ControlPointer Function Laser Pointer FunctionWireless Mouse Operation Remote Control CodeRemote Control Batteries Installation Remote Control Operating RangeInstallation Adjustable FeetPositioning the Projector Installation Connecting to a ComputerTerminals Projector Video Source example Connecting to Video EquipmentBasic Operation Turning On the ProjectorTurning Off the Projector Focus Adjustment Zoom AdjustmentKeystone Adjustment Basic OperationAuto Set Up Function Picture Freeze FunctionKeystone correction Corner Sound Adjustment Timer FunctionNo Show Function Direct OperationOn-Screen Menu Remote ControlTop Control On-Screen MenuMenu Bar Input Source Selection Computer InputComputer System Selection Computer InputAuto ModeComputer Adjustment Auto To store adjustment dataAuto PC Adj Computer Adjustment Manual Mode free ResetDisplay area To store adjustment data To clear adjustment dataStandard Image Level SelectionReal Image button Standard RealImage Level Adjustment Screen Size Adjustment Video Input Input Source Selection Video, S-Video, Y, Pb/Cb, Pr/CrPb/Cb, Pr/Cr Input Source Selection RGB Scart 21-Pin Video InputRGB Scart Input button Computer Video Computer 2 buttonVideo or S-Video Video System SelectionComponent AV System Menu Video or S-VideoImage button Standard Cinema CinemaColor TintProgressive Resets all adjustment to their previous figure Setting SettingSetting Lamp mode Power managementOn start PointerWireless Mouse mode To change the code for the remote controlProjector mode To change the code for the projectorMaintenance and Cleaning Projector is shut down and the Warning indicator lights redThen check the items below Cleaning the Air Filters Maintenance and CleaningCleaning the Projection Lens Cleaning the Projector CabinetReset the Lamp replace counter Lamp ReplacementLamp Replace Counter Lamp Handling PrecautionsAppendix TroubleshootingAppendix Projector Condition Indicators and Projector ConditionImage Adjust Screen PC AdjustMenu Tree InputImage Adjust System SettingImage Select SoundCompatible Computer Specifications FreqKHz Technical Specifications Configurations of Terminals Terminal HDB15-PIN Pin ConfigurationTerminal DVI-I Pin Configuration Optional Parts Attaching the Lens Cover Deleting key registration Key registrationTo lock the projector with USB key Off Projector is not locked with USB Key On1Appendix Appendix Key to better communications Canada
Related manuals
Manual 60 pages 54.4 Kb

LC-XE10 specifications

The Eiki LC-XE10 is a high-performance LCD projector designed for a wide range of applications, including business presentations, educational environments, and home entertainment. With its combination of advanced features, robust technology, and user-friendly design, the LC-XE10 stands out as an ideal choice for professionals and enthusiasts alike.

One of the main features of the Eiki LC-XE10 is its impressive brightness level, which reaches up to 5000 lumens. This high brightness allows it to produce sharp and vivid images even in well-lit environments, making it perfect for conference rooms and classrooms. The projector's native XGA (1024 x 768) resolution ensures clarity in both text and graphics, which is particularly beneficial for presentations that require detailed information.

The LC-XE10 utilizes advanced 3LCD technology, providing excellent color accuracy and vibrant images. This technology minimizes the risk of color imbalances and delivers true-to-life colors, ensuring that presentations are visually appealing and engaging. Additionally, the projector supports a range of input options, including HDMI, VGA, and composite video, making it compatible with various devices, such as laptops, DVD players, and document cameras.

Another key characteristic of the Eiki LC-XE10 is its longevity. With a lamp life of up to 4000 hours in normal mode, users can enjoy extended usage without the need for frequent replacements. The projector is designed with ease of maintenance in mind, featuring a simple lamp replacement process and a dust filter that helps prolong the device's lifespan.

For those who value versatility, the LC-XE10 includes a powered zoom and focus lens, offering a focal length of 1.2 to 1.44, making it suitable for various screen sizes and room configurations. The projector also features a horizontal and vertical keystone correction function, which helps to achieve a perfectly rectangular image even when the projector is not centrally aligned with the screen.

In conclusion, the Eiki LC-XE10 is an outstanding LCD projector that combines high brightness, excellent color performance, and user-friendly features. Its reliable performance and flexible connectivity options make it a perfect choice for anyone looking to deliver impactful presentations or enjoy high-quality visual content.