Dukane 28A7100HC manual Component video connection, VGA connection

Component video connection

If your video device has component connectors, use a Component to S- video adapter or the Component to VESA adapter (available from a third- party vendor) for HD and progressive sources. Plug the component cable into the video device. Plug the other end of the component cable into the adapter and plug the adapter into the projector’s S-video(for S-video) or Computer in (for VESA) connector. Use the audio adapter as described on the previous page.

Component connection offers the highest quality video output.

connect component cables via component to S-video adapter and audio cables via audio adapter

or

via component to VESA adapter and audio adapter

Component to VESA

Component to S-video

VGA connection

If your video device has a 15-pin VGA output, plug one end of the included computer cable to the VGA connector on your video source. This connector may be labeled “To Monitor” on the video source. Plug the other end of the cable into the Computer In connector on the projector.

Use the audio adapter as described on the previous page.

connect VGA cable and audio cable via audio adapter

connect power cable

Connect the power cord to the Power connector on the side of the projector and to your electrical outlet.

NOTE: Always use the power cord that shipped with the projector.

14