Adjusting the image
Adjust the height of the projector, if necessary, by pressing the release but- | adjust height |
|
ton to extend the foot. |
| rotate |
|
| |
Rotate the leveling foot located at the rear of the projector, if necessary. |
| leveling |
| elevator | foot |
Avoid placing your hands in near the hot exhaust vent in front of the projec- | foot | release button |
tor. |
|
|
Position the projector the desired distance from the screen at a 90 degree | adjust distance |
|
angle to the screen. |
|
|
See page 40 for a table listing screen sizes and distances.
Adjust the zoom or focus. | adjust zoom or focus |
focus
(thin ring)zoom (thick ring)
If the image is not square, adjust the keystone using the buttons on the key-
pad. | adjust keystone |
|
|
|
| ||
|
|
|
| ||||
Press the top Keystone button to reduce the upper part of the image, and |
|
|
|
|
|
|
|
press the bottom Keystone button to reduce the lower part. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjust the Contrast or Brightness in the Picture menu. | adjust Picture menu | ||||||
| |||||||
See page 30 for help with these menu adjustments. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8