Alesis SR-16 manual Copy Functions, 3A Copy, Append, and Double Patterns, Copy to Patt

Page 30

3.3 COPY FUNCTIONS

The following Copy functions assume that you are copying a Main Pattern to a Main Pattern (remember, copying a Main Pattern to another Main Pattern copies the Fill along with it). Other combinations take the following rules into account.

•Copying a Main Pattern to a non-empty Pattern or to itself appends the Fill to the existing Fill, as well as appends the Main Pattern to the existing Main Pattern.

•If you copy from Main to Fill (or vice-versa) within a particular numbered Pattern, the destination will be erased and replaced with the source Pattern since Main and Fill Patterns must have the same length. This is useful if you want the Fill to contain variations on the Main Pattern—just copy the Main to Fill and make your additions/changes.

•Copying a Fill to a Fill follows the same rules as copying a Main Pattern to a Fill.

•The only copy technique that appends a Pattern to another Pattern is copying a Main Pattern to another Main Pattern.

3.3A Copy, Append, and Double Patterns

1. The SR-16 should be in Pattern mode and stopped.

2. Select the Pattern to be copied.

3. Press and hold the COPY button, and keep holding it down until step (6). The display says

COPY TO PATT.

4. Enter the destination Pattern number into which the current Pattern will be copied with the INC/DEC or number buttons.

•Copying a Pattern to a blank destination Pattern replaces the blank Pattern with the original Pattern data.

•Copying to a Pattern that already contains data appends the original data to the end of the data in the destination Pattern. If this would result in a Pattern with more than 128 beats, the display will say TOO MANY BEATS.

•Copying a Pattern to itself doubles the length.

•The Drum Set assignment and Pattern name are copied along with the drum data only if the destination Pattern is empty.

5. Press PLAY. The display says COPY DONE. 6. Release the COPY and PLAY buttons.

3.3B Copy One Drum Pad's Part to Another Drum Pad

Merge: When the destination drum pad already has a pattern, the source pattern will be merged with the destination pattern. Note that if the two parts contain events for the same pad on the same beat, only one event will prevail and it will take the level of the source Pattern event.

Sound Stacking™: When the destination drum pad is empty (no recorded pattern), the source pattern will be copied and any drum sound assigned to the destination drum pad will play the exact same pattern as the source drum pad. This technique lets you stack multiple drum sounds together to create monster composite sounds. See section 8.3: Sound Stacking.

26

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Alesis Table of Contents Song Mode Midi SetupCreating Drum Sets Applications BackupTroubleshooting Chart Midi Supplement1A If You Just Cant Wait… IntroductionWelcome to the SR-16 Drum Machine 1B SR-16 Quick DescriptionReturn Your Warranty Card Now Ground Rules2A The Pattern/Song Recording Method 2B The Four Different Types of Patterns About Defaults How Looping Simplifies RecordingWhats a Voice? 2F Physical Layout Pattern select buttons2G Display Layout Text ProtocolsImportant HOW to Communicate with the SR-16 10 Steps to Instant Gratification Setup and Checkout Empty Patt3F Buttons that Toggle Beat Record Setup Quantize Select1 Select the Quantization Value Quantize Select Swing Select 2 Select the Swing Value Swing SelectClick Select 3 Enable Click Metronome and SET Rhythm Click Select4 SET Click Metronome Volume Click VOL Click5 Adjust Velocity Response Velocity Velocity Loud6 ADD/REMOVE Beats from Pattern END Length 7 ADD/REMOVE Beats from Pattern Beginning Start9 Step Mode Recording Step Mode 8 Offset a Pattern or Drum Part001/00 VOL Following page summarizes the step edit options No Name Name 10 Name the Pattern NamePLAYBACK/RECORD Basics RockPlaying BACK/RECORDING Patterns 1A The Dual-Purpose Fill ButtonSet Pattern Tempo Select Individual PatternsStop/Restart a Pattern 1F Using the Start/Stop Footswitch 1G Select New Patterns While in Perform Playback ModeSelect Fill Patterns in Perform Playback Mode 1I Record a Pattern 1K Using Fill to Create Repetitive Drum Hits 2B Erase an Entire Pattern Erase Functions2A Erase Mistakes While Recording ErasedCopy to Patt Copy Functions3A Copy, Append, and Double Patterns 3B Copy One Drum Pads Part to Another Drum PadCopy a Pattern to Another SR-16 Via Midi 3F Copy a Drum Set to Another SR-16 Via Midi Drumset Select Creating Drum Sets1 Select Drum SET Drumset Select Fatsnare Volume3 SET PAD Volume Volume 2 Assign Sounds to PadsPanning 4 SET PAD Stereo Position Panning5 SET PAD Tuning Tuning Tuning +3ASN Mode Multi 6 SET Triggering Mode ASN ModeOutput Main 7 Choose Output Jacks OutputSave SET to 39? User 8 Save Drum SET Save SETSET Mode Patt 9 Manual Drum SET Override SET ModeSong Mode Basics 1A Select Songs and Enter/Exit Song Mode1B Set Song Tempo Start from the Middle of a Song Continue, Re-start, or Jump to Next Song StepLoop a Pattern Indefinitely 1F Name a Song Name1G Change Song Tempo as the SR-16 Plays Real Time Song Creation2A Real Time Song Editing 3B Add a Fill Manual Song Creation3A Enter a Pattern Remove a Fill3G Erase an Entire Song Delete a Step3F Replace a Step Copy a Song to Itself Double Song Length4J Copy a Song to Another SR-16 Via Midi Copy to SongMidi Setup Midi CH Omni1 Select Midi Channel Midi CH 2 Receive Midi Drum Notes Drum DrumDrum OUT OFF 3 Transmit Midi Drum Notes Drum OUT4 Assign Midi Note Numbers to Drum Pads Note Drum Pad Number5 Accept External Clock Data Clock Clock in onClockout 6 Send Clock Data to Other Devices ClockoutMidithru OFF 7 Merge Midi in with Midi OUT MidithruPRG Chng OFF 8 Select Drum Sets VIA Midi Program Changes PRG Chng9 MAP Drum Notes Note MAP Midi Backup Backup BasicsTape Interface Hookup Saving to DataDiskReceive Data Directly from Another Midi Device Loading from DataDiskVerify TAPE? 2 Save ALL Memory Contents to Tape Store to TAPE?Store to TAPE? 3 Verify Data Recorded on Tape Verify TAPE?Load in TAPE? 4 Load Data from Tape Load in TAPE?Load in SONG01 5 Load ONE Pattern from Tape Load in Patt6 Load ONE Song from Tape Load in Song Free MEM 100% 0 page 7 Check Available Memory Free MEMVersion 1 Clear MEMORY/RE-INITIALIZE Parameters2 Check Software Version 1A SR-16 As Midi Timing Master ApplicationsMidi Sync Applications 1B SR-16 as Midi Timing SlaveSynching to Synthesizer Sequencers Save Memory Through Song Steps Strategies for Assembling Patterns and Songs2A Create Fills Quickly with the Copy Function Odd Time Signatures3A Basics 3B Sound Stacking when Using the SR-16 as a Drum MachineSound Stacking 3C Editing Stacked CombinationsUnderstanding Rhythmic Notation Midi Supplement Midi Basics1A Midi Hardware 1B About Sequencing Midi Channel Messages2A Voice Messages 2B Mode Messages System Common MessagesBooks on Midi Videos on Midi Alesis SR-16 Troubleshooting Chart Won’t load from tape. Note Be sure to verify all saves

SR-16 specifications

The Alesis SR-16 is a legendary drum machine that has carved its niche in the realm of music production since its initial release in the early 1990s. Renowned for its affordability and user-friendly interface, the SR-16 has become a staple for musicians, producers, and composers across various genres. Its robust set of features and reliable performance make it an attractive choice for both beginners and seasoned professionals.

One of the standout features of the Alesis SR-16 is its expansive library of high-quality drum sounds. It houses 233 onboard drum and percussion sounds, encompassing everything from acoustic drum kits to electronic beats. The samples are derived from real instruments and meticulously recorded to provide a rich, authentic sound that can enhance any musical project. Additionally, the SR-16 allows users to layer and mix different sounds, giving them the flexibility to create customized drum tracks.

The SR-16 employs advanced sequencing capabilities, letting users create intricate patterns and beats with ease. It offers 50 preset patterns, spanning multiple musical styles, which can be edited and modified to suit individual needs. Users can also record their own patterns in real-time or step mode, allowing for greater creativity and control over the final output.

Alesis has designed the SR-16 with a user-friendly interface, featuring a backlit LCD screen and intuitive layout that simplifies the programming process. This accessibility makes the drum machine ideal for live performances as well as studio sessions. Furthermore, the SR-16 includes facilities for triggering sounds via MIDI, enabling seamless integration with other hardware and software setups.

Another notable feature is the onboard effects processing, which enhances the sound quality and provides additional sonic possibilities. The SR-16 includes reverb and filter effects, allowing users to manipulate their sounds and create depth within their musical arrangements.

The compact and rugged build of the Alesis SR-16 makes it suitable for musicians on the go. With its substantial battery life and adaptability for power sources, it is a reliable companion for live performances or recording sessions.

In conclusion, the Alesis SR-16 stands out as an essential tool for anyone looking to expand their musical toolkit. With its high-quality sounds, intuitive sequencing, and versatility, it remains a relevant choice decades after its introduction, merging classic design with modern technological advancements. Whether for crafting beats in the studio or performing live, the SR-16 delivers a unique and engaging drumming experience.
Top Page Image Contents