Alesis manual 1G Change Song Tempo as the SR-16 Plays, Real Time Song Creation

Page 42

5.1G Change Song Tempo as the SR-16 Plays

To change the Song tempo as it plays, press the TEMPO/PAGE UP button to increase the tempo, and the TEMPO/PAGE DOWN button to decrease the tempo.

5 . 2 REAL TIME SONG CREATION

To create a Song in real time (this assumes an empty song):

1. (Optional) In Pattern mode, select the Pattern you want for the first Song step.

2. Select Song mode and the desired Song number.

3. Select Compose mode. The display will show STEP 01 and the contents of the step, which is currently END (if the first step says END , that indicates that the Song is empty since it contains no data. If the first step shows a PATTern number, then the Song is not empty).

4. If you did not perform step (1) above, enter the desired Pattern for step 1 (Preset or User, A or B, A Fill or B Fill).

5. Press PLAY. If you performed step (1) above, the Pattern you selected will begin playing. Otherwise, the Pattern specified in step (4) above will start playing.

6. If you enter a new Pattern number (Preset or User, A or B) while the first Pattern is playing, the new Pattern will begin playing after the first Pattern has finished and be stored as another Song step in the Song. If you let the original Pattern keep playing, it will add a new Song step with its Pattern number every time it repeats.

7. In addition to selecting different Patterns, you can press FILL at any time. The SR-16 will remember where you pressed FILL.

As in Pattern mode, pressing FILL will automatically transition to the B Pattern if the A Pattern is currently playing (and vice versa), or will continue playing the same Pattern if the FILL button is held past the end of the Fill.

A Fill can transition into any Pattern number, A or B, by specifying the Pattern before the end of the Fill and releasing FILL before the Fill has finished playing. If you hold FILL past the end of the Fill, the associated Main Pattern will continue playing and any Pattern you may have previously specified for the next Step will be forgotten.

When recording a Song in Compose mode, the Count/A/B/Fill footswitch duplicates the FILL button function.

5.2A Real Time Song Editing

If you have already recorded material in a Song, pressing PLAY while in Compose mode will not allow recording until after the last Song step (as indicated by the display switching from PLAYING to RECORDING). However, you can overdub Fills at any time, and these will be recorded in the Song where played. Under these conditions, holding FILL past the downbeat doesn't make any difference; the Patterns used in Song steps are not altered.

38

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Alesis Table of Contents Song Mode Midi SetupCreating Drum Sets Applications BackupTroubleshooting Chart Midi Supplement1A If You Just Cant Wait… IntroductionWelcome to the SR-16 Drum Machine 1B SR-16 Quick DescriptionReturn Your Warranty Card Now Ground Rules2A The Pattern/Song Recording Method 2B The Four Different Types of Patterns About Defaults How Looping Simplifies RecordingWhats a Voice? 2F Physical Layout Pattern select buttons2G Display Layout Text ProtocolsImportant HOW to Communicate with the SR-16 10 Steps to Instant Gratification Setup and Checkout Empty Patt3F Buttons that Toggle Beat Record Setup Quantize Select1 Select the Quantization Value Quantize Select Swing Select 2 Select the Swing Value Swing SelectClick Select 3 Enable Click Metronome and SET Rhythm Click Select4 SET Click Metronome Volume Click VOL Click5 Adjust Velocity Response Velocity Velocity Loud6 ADD/REMOVE Beats from Pattern END Length 7 ADD/REMOVE Beats from Pattern Beginning Start9 Step Mode Recording Step Mode 8 Offset a Pattern or Drum Part001/00 VOL Following page summarizes the step edit options No Name Name 10 Name the Pattern NamePLAYBACK/RECORD Basics RockPlaying BACK/RECORDING Patterns 1A The Dual-Purpose Fill ButtonSet Pattern Tempo Select Individual PatternsStop/Restart a Pattern 1F Using the Start/Stop Footswitch 1G Select New Patterns While in Perform Playback ModeSelect Fill Patterns in Perform Playback Mode 1I Record a Pattern 1K Using Fill to Create Repetitive Drum Hits 2B Erase an Entire Pattern Erase Functions2A Erase Mistakes While Recording ErasedCopy to Patt Copy Functions3A Copy, Append, and Double Patterns 3B Copy One Drum Pads Part to Another Drum PadCopy a Pattern to Another SR-16 Via Midi 3F Copy a Drum Set to Another SR-16 Via Midi Drumset Select Creating Drum Sets1 Select Drum SET Drumset Select Fatsnare Volume3 SET PAD Volume Volume 2 Assign Sounds to PadsPanning 4 SET PAD Stereo Position Panning5 SET PAD Tuning Tuning Tuning +3ASN Mode Multi 6 SET Triggering Mode ASN ModeOutput Main 7 Choose Output Jacks OutputSave SET to 39? User 8 Save Drum SET Save SETSET Mode Patt 9 Manual Drum SET Override SET ModeSong Mode Basics 1A Select Songs and Enter/Exit Song Mode1B Set Song Tempo Start from the Middle of a Song Continue, Re-start, or Jump to Next Song StepLoop a Pattern Indefinitely 1F Name a Song Name1G Change Song Tempo as the SR-16 Plays Real Time Song Creation2A Real Time Song Editing 3B Add a Fill Manual Song Creation3A Enter a Pattern Remove a Fill3G Erase an Entire Song Delete a Step3F Replace a Step Copy a Song to Itself Double Song Length4J Copy a Song to Another SR-16 Via Midi Copy to SongMidi Setup Midi CH Omni1 Select Midi Channel Midi CH 2 Receive Midi Drum Notes Drum DrumDrum OUT OFF 3 Transmit Midi Drum Notes Drum OUT4 Assign Midi Note Numbers to Drum Pads Note Drum Pad Number5 Accept External Clock Data Clock Clock in onClockout 6 Send Clock Data to Other Devices ClockoutMidithru OFF 7 Merge Midi in with Midi OUT MidithruPRG Chng OFF 8 Select Drum Sets VIA Midi Program Changes PRG Chng9 MAP Drum Notes Note MAP Midi Backup Backup BasicsTape Interface Hookup Saving to DataDiskReceive Data Directly from Another Midi Device Loading from DataDiskVerify TAPE? 2 Save ALL Memory Contents to Tape Store to TAPE?Store to TAPE? 3 Verify Data Recorded on Tape Verify TAPE?Load in TAPE? 4 Load Data from Tape Load in TAPE?Load in SONG01 5 Load ONE Pattern from Tape Load in Patt6 Load ONE Song from Tape Load in Song Free MEM 100% 0 page 7 Check Available Memory Free MEMVersion 1 Clear MEMORY/RE-INITIALIZE Parameters2 Check Software Version 1A SR-16 As Midi Timing Master ApplicationsMidi Sync Applications 1B SR-16 as Midi Timing SlaveSynching to Synthesizer Sequencers Save Memory Through Song Steps Strategies for Assembling Patterns and Songs2A Create Fills Quickly with the Copy Function Odd Time Signatures3A Basics 3B Sound Stacking when Using the SR-16 as a Drum MachineSound Stacking 3C Editing Stacked CombinationsUnderstanding Rhythmic Notation Midi Supplement Midi Basics1A Midi Hardware 1B About Sequencing Midi Channel Messages2A Voice Messages 2B Mode Messages System Common MessagesBooks on Midi Videos on Midi Alesis SR-16 Troubleshooting Chart Won’t load from tape. Note Be sure to verify all saves

SR-16 specifications

The Alesis SR-16 is a legendary drum machine that has carved its niche in the realm of music production since its initial release in the early 1990s. Renowned for its affordability and user-friendly interface, the SR-16 has become a staple for musicians, producers, and composers across various genres. Its robust set of features and reliable performance make it an attractive choice for both beginners and seasoned professionals.

One of the standout features of the Alesis SR-16 is its expansive library of high-quality drum sounds. It houses 233 onboard drum and percussion sounds, encompassing everything from acoustic drum kits to electronic beats. The samples are derived from real instruments and meticulously recorded to provide a rich, authentic sound that can enhance any musical project. Additionally, the SR-16 allows users to layer and mix different sounds, giving them the flexibility to create customized drum tracks.

The SR-16 employs advanced sequencing capabilities, letting users create intricate patterns and beats with ease. It offers 50 preset patterns, spanning multiple musical styles, which can be edited and modified to suit individual needs. Users can also record their own patterns in real-time or step mode, allowing for greater creativity and control over the final output.

Alesis has designed the SR-16 with a user-friendly interface, featuring a backlit LCD screen and intuitive layout that simplifies the programming process. This accessibility makes the drum machine ideal for live performances as well as studio sessions. Furthermore, the SR-16 includes facilities for triggering sounds via MIDI, enabling seamless integration with other hardware and software setups.

Another notable feature is the onboard effects processing, which enhances the sound quality and provides additional sonic possibilities. The SR-16 includes reverb and filter effects, allowing users to manipulate their sounds and create depth within their musical arrangements.

The compact and rugged build of the Alesis SR-16 makes it suitable for musicians on the go. With its substantial battery life and adaptability for power sources, it is a reliable companion for live performances or recording sessions.

In conclusion, the Alesis SR-16 stands out as an essential tool for anyone looking to expand their musical toolkit. With its high-quality sounds, intuitive sequencing, and versatility, it remains a relevant choice decades after its introduction, merging classic design with modern technological advancements. Whether for crafting beats in the studio or performing live, the SR-16 delivers a unique and engaging drumming experience.
Top Page Image Contents