Digital Keystone Correction
Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen.
To correct this, you can perform the following steps.
1.Adjust the height of the projec- tor.
2.Press Keystone AUTO or AUTO on the remote control.
If the image is still distorted, you will need to manually correct it fol- lowing ONE of these steps.
•Press 3 Left/ Right 4 (hot key) on the control panel of the projector to display the status bar labelled Keystone. Press 3 Left to correct
keystoning at the top of the image. Press Right 4 to correct keystoning at the bottom of the image.
•Press 
/ 
on the remote control to display the status bar labelled Keystone, then
press 
to correct keystoning at the top of the image or press 
to correct keystoning at the bottom of the image.
•Press Menu key on the projector or the remote control. Go to 
Picture
For example,
1.Press 3 Left on the projector or
2.Press 
on the remote control or
3.Press 3 Left on the projector or 3 on the remote control when you are in Picture
Keystone |
|
| 0 | Keystone |
1.Press Right 4 on the projector or
2.Press 
on the remote control or
3.Press Right 4 on the projector or 4 on the remote control when you are in Picture -
Keystone |
|
| 0 | Keystone |
+6