BenQ PB2140/PB2240 user manual Advance Menu

4. Advance Menu

FUNCTION	DESCRIPTION
	The projector can be installed on a ceiling or behind a screen, or with one
	or more mirrors. Contact your dealer for the ceiling mount bracket
	(optional accessory) if you need to install the projector on your ceiling.
	Floor front: Select this setting with
	the projector set on the floor and
	audience viewing the projected
	images from the front side of the
	screen. This is the most common
	setting.
	Ceiling front: Select this setting with
	the projector suspended from the
	ceiling and audience viewing the
	projected images from the front
Mirror	side.
	Floor rear: Select this setting when
	the projector is placed near the
	floor and behind the screen. A
	special rear projection screen is
	required.
	Ceiling rear: Select this setting when
	the projector is suspended from the
	ceiling and placed behind the
	screen. A special rear projection
	screen is required.
Blank Time	Sets the image blank time when the Blank feature is activated, once
	elapsed the image will return to the screen.
	Sets whether the projector searches automatically for input signals. If the
Source Scan	source scan is on, the projector will scan for input signals in the following
	order: Analog RGB --> Video --> S-Video until it acquires a signal. If the
	function is not activated, the projector selects the last input signal.
	Language sets the language for the OSD control menus.
Language	Use 3 Left/ Right 4on the projector or 3/ 4 on the remote control to
	select your desired language from among English, French, German, Ital-
	ian, Spanish, Russian, Traditional Chinese, Simplified Chinese, Japanese
	and Korean.
User Logo	Enables the user to select which logo screen will appear during projector
	start-up. Three modes are available: Default (BenQ logo), black screen or
	blue screen.

Operation 27