Avenview Cat5 specifications General Troubleshooting Problem Possible Solution

d.Connect the Cable: Plug one ends of UTP cable to DVI-C5-S Transmitter’s “LINK IN/OUT” port and the other end to the DVI-C5-R Transceiver’s “LINK IN/OUT” port. The monitor connected to the Transceiver should now display and the “LINK” LED should turn green to indicate the DVI signal activation.

Use EQ control to adjust the video quality for best signal.

Installation Diagram of DVI-C5-S and DVI-C5-R

e.Extending Audio Signals: The DVI-C5-S Transmitter and DVI-C5-R Transceiver are not able to extend audio signals. Use a pair of Avenview AUD-RJ11 Audio Extenders with 4-wire phone cable and RJ11 connectors to extend the audio signal.

General Troubleshooting
Problem	Possible Solution
	∙ Try adjusting the brightness, sharpness, contrast, and color
Off-Center Screen Image, Odd	balance controls of your monitor.
Colors or No Picture	∙ Try adjusting the centering and positioning controls of your
	monitor to position the picture on the screen.
No Image	∙ Ensure that the monitor cable is securely fastened to the DVI
	and Monitor port.

www.avenview.com 10