DVI-C5-R Installation

e.EQ Adjustment: You can adjust the EQ control to Auto mode by rotating the EQ control Anticlockwise. The “EQ” and “AUTO” LEDSs will display blue.

After connecting the extender system, if you see dynamic dots on unclear image on the DVI, you need to adjust the signal from Transmitter.

f.EDID Simulation: The Transmitter has built-in EDID simulator. When local DVI monitor is connected to Transmitter, it will automatically record the EDID data from DVI Monitor. When a local DVI monitor is not connected the Transmitter will simulate the EDID data and activate the DVI signal on the PC or DVD Player.

a.First Time Connection: Connect DVI Monitor’s DVI Cable to the receiver and TURN ON the monitor.

b.Device Connection: Plug power adapter to DVI-C5-R (Transceiver), the “PWR” LED and “M1 LINK” will turn ON. The other “LINK” LED should turn off because there is no input of video signal from “LINK IN” port.

c.EQ Adjustment: You can adjust the EQ control to Auto Mode by rotating the EQ Anticlockwise. The “EQ” and “AUTO” LEDs will turn ON Blue.

If noise or unstable image is seen on the local DVI monitor, it indicates the DVI signal received by the Transmitter needs to be adjusted.

You can also adjust the EQ control for better image display. This changes the EQ into manual mode. The “EQ” and “AUTO” LED will turn off to indicate the manual EQ Mode.

www.avenview.com	7