ADTRAN Tracer 3202 Cable Kit Instructions
Background
Newer models of the Tracer 3202 outdoor unit will have 1.5 to 2 meters of twisted pair cable (“pigtail”) preattached to the 3202 base. The twisted pair conductors are
•1 CPC (circular plastic connector) receptacle
•1 CPC strain relief
•4 receptacle crimping pins (male gender)
The instructions described in this document refer to the 3202
Directions
Figure 1 shows a detailed view of the connector assembly required to attach the receptacle connector to the pre-attached 3202 cable. The plug connector assembly is shown for reference only.
Receptacle Connector with Strain Relief | Plug Connector |
(3202 end) | (Customer end) |
x 2
P1
A 
B
A 
B
P2
3202 Pigtail Cable
Detail A – A
1
2 
3
4
Schematic
11
22
33
44
P1 P2
Customer Cable
Detail B – B
1
2 
3
4
Figure 1 – Connector Assembly Diagram
The provided 3202 pigtail cable has heat shrink tubing on conductor pairs 1 and 2. Insert the 1,2 pair in the 1,2 slots in the receptacle, without regard to which conductor is wired to conductor 1 or conductor 2. Likewise, insert the 3,4 pair in the 3,4 slots in the receptacle, without regard to which conductor is wired to conductor 3 or conductor 4.
© ADTRAN, 2002 | 1 |